1 3/4″ Hobble #H2
$126.00
Description: The 1 3/4″ Hobble #H2 is handmade of doubled and stitched burgundy latigo leather with smooth handmade stainless steel squares. This is a stout hobble at 1 3/4 inches. The soft but strong latigo leather should not chafe your horse’s legs.
How it works: Many horses have been saved from severe injury when caught in wire because they were hobble trained. A horseman may also teach his or her horse to accept hobbles and sidelines so it won’t need to be tied or ground tied. When a horse is hobbled it won’t hurt its mouth with a jerk from a stepped on or looped rein. Hobbles and sidelines can also have a quieting effect on the horse’s mind. Investing in hobbles and their training can have big pay-backs.
Visit “Hobble Along” to read my Tack Talk article on proper and safe use of hobbles.
The first time you use the hobbles on your colt or horse, or while training the horse to accept hobbles, use a wide open sandy area. Do not put hobbles on in a confined space until they accept them easily and well. If you are not familiar with the use of hobbles seek help from a professional who is experienced with their use.
Related products
-
German Martingale with Split Reins #CM1C
$202.00Description: The German Martingale with Split Reins #CM1C is the same as the German Martingale Complete #CM1A but without headstall or bit. The martingale is made of 1/4 inch tan nylon cord and comes with your choice of 3 harness leather reins: #ASR6 DM Harness Leather Split Reins are 6 1/2 to 7 feet long and work well on smaller horses, the #ASR3 XX Harness Leather Split Reins are 7 to 7 1/2 feet long and a good choice for horses 14.2 to 16 hands and the #ASR2 XXX Harness Leather Split Reins are 7 1/2 to 8 feet long and work well for horses 16 hands and over. See dropdown to order.
How it Works: The key to the German martingale is the long neck strap giving a good line from the bit to the cinch. This allows the neck to lower from the withers before flexing at the poll. The 1/8 inch solid braid cord that runs through the bit to the reins has a high quality hard finish so slides very easily allowing a quick release. The release is more important than the pull but you have to pull to get the release. A horse learns from the release. The safety hobble strap attached to the neck strap goes through the gullet of the saddle and over the horn to prevent the neck strap from sliding to the ears.
Assistance from a professional is necessary to learn safe use of a German martingale.
The martingale is a very useful tool to aid a horse in learning proper head position as he learns collection. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
The labeled diagram shows the Complete German Martingale #CM1A. This German Martingale with Split Reins #CM1C is the same but comes without headstall and bit.
-
No Buckle Hobble with Leather Center #H3L
$105.00Description: This No Buckle Hobble with Leather Center #H3L is made of 1 3/4 inch doubled and stitched latigo leather. It has a 3 inch long latigo leather link in the center to separate your horse’s legs. The rings and squares are made of smooth stainless steel. This hobble has an easy “on/off” latch that makes it so quick and simple to take on and off your horse’s fetlocks. This should only be used on horses that are completely hobble broke.
Visit “Hobble Along” to read my Tack Talk article on the safe and proper use of hobbles.
Only for use on horses that are hobble broke.
-
Nylon Rope Cavesson w/Rawhide Braided Nose #CA1
$155.00Description: The noseband on this 3/16″ Nylon Rope Cavesson w/Rawhide Braided Nose #CA1 is made of round 3/16 inch rope. The nose button and heel knot are covered in hand braided rawhide. The headstall is made of 1/2 inch burgundy latigo leather with a leather loop keeper. The buckle is beveled stainless steel. The headstall leather just below the buckle is handsewn together to prevent the buckle from slipping when the headstall is adjusted. There are hand braided rawhide ring knots on the noseband to hold the headstall in place.
This cavesson comes in small (19 in.), medium (21 in.), large (23 in.) and extra large (25 in.) (see dropdown). In general a small will fit a horse under 14.2 hands and 900 lbs., a medium will fit a horse between 14.2 and 15 hands, a large will fit most horses between 15.1 and 16 hands and the extra large is for those over 16 hands.
Size Measurement: An easy way to be certain to get the correct cavesson size is to wrap a leadrope around the nose where the cavesson will lay, mark the leadrope with a magic marker, straighten it and then measure the leadrope. When measuring, be sure to wrap the leadrope loosely enough that the horse will have enough room between his nose and the cavesson to be comfortable and to be able to hold the bit. A good rule of thumb is 2 fingers width between the nose and cavesson (which is the diameter of most leadropes) if the horse is trained to a cavesson.
This is our favorite for a horse that has advanced beyond the leather and string cavessons. It gives the strongest signal of any of our cavessons. It looks good on a horse.
For more information on cavesson fit and use visit: There’s More to a Cavesson than Meets the Eye: How and Why to Use Cavessons
-
Kick Chain #KC1
$67.00Description: The Kick Chain #KC1 is made of doubled and stitched 1 3/4 inch burgundy latigo. It has a leather cuff that fastens to a rectangle to secure it to the fetlock. The rectangle, dee and 12 inch chain are all smooth stainless steel. This kick chain is made to fit the front or back fetlock of any size horse.
How it works: This is an ideal aid for horses that want to kick or paw while in the stall or trailer, or paw while tied up. It can be fastened to either a front or hind fetlock. Most horses will stop pawing or kicking after a short time with the kick chain but a small percentage will need to wear it indefinitely. Generally, one kick chain can be used for a session and then transferred to the other front or back fetlock for a session and the problem will be solved. Occasionally a horse that has been pawing or kicking for a long time will need to wear a kick chain on both legs at the same time.
This is sold as a single kick chain. If you need more than 1 please order additional kick chains in the ”quantity” box.
This is not a tool to be used for teaching horses to not kick at people.
Shown on a horse that is 15.1 hands and 1100 pounds.
-
German Martingale with Roping Rein #CM1D
$126.00Description: The German Martingale with Roping Rein #CM1D is the same as the German #CM1A but comes with a roping rein instead of split reins. This martingale has no headstall or bit so you can add your own. The martingale is made of 1/4 inch tan nylon cord with a 1/2 inch latigo safety hobble strap. The roping rein has been edged, hand rubbed, oiled with Neatsfoot Oil and hand rubbed again.
How it Works: The key to the German martingale is the long neck strap giving a good line from the bit to the cinch. This allows the neck to lower from the withers before flexing at the poll. The 1/8 inch solid braid cord that runs through the bit to the reins has a high quality hard finish so slides very easily allowing a quick release. The release is more important than the pull but you have to pull to get the release. A horse learns from the release.
Assistance from a professional is necessary to learn safe use of a German martingale.
The martingale is a very useful tool to aid a horse in learning proper head position as he learns collection. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
The diagram shows the Complete German Martingale #CM1A. This German Martingale #CM1D comes with a roping rein and without headstall or bit.
