Bill Riddle Sideline #SL2
Price range: $97.00 through $106.00
Description: The Bill Riddle Sideline #SL2 is made of two doubled and stitched burgundy latigo leather cuffs with easy on/easy off closures. These cuffs are 1 3/4 inch wide and connected by your choice of 24, 30 or 36 inch (see dropdown) pieces of soft white nylon rope. The rectangles and Dees are made of smooth round stainless steel rod.
How it works: This is a very helpful piece of equipment to use when you are sacking out a colt, teaching a young horse to stand hobbled or wanting to keep a horse from kicking in the trailer. You can prevent a horse that kicks in the trailer from hurting himself or damaging the trailer by using this sideline on just the left side or right side legs or use two sidelines and cross them between the legs. Sidelines and hobbles can both have a quieting effect on a horse’s mind.
The first time you use the sideline on your horse or while training the horse to accept them use a wide open sandy area. Do not put it on in the trailer or other confined space until they accept the sideline easily and well.
Related products
-
Leather Noseband/Tiedown #T8
Price range: $70.00 through $142.00Description: The Leather Noseband Tiedown is made of 1 inch harness leather and lined with burgundy latigo leather. The leather has been edged, hand rubbed, treated with Neatsfoot Oil and hand rubbed again. The buckle is stainless steel with a leather keeper. The leather beneath the buckle is stitched together to keep the buckle in place when you adjust it between horses. The ring is also stainless steel. Shown without a tiedown strap but is available with your choice of a #ZG 1 inch or a 3/4 inch Leather Tie Down Strap or #ZH Nylon Tie Down Strap (see dropdown to order).
How it works: This is the softest noseband I make and will work really well on a sensitive horse or one that wants to use the noseband for balance rather than pushing on it or leaning into it. A very well made noseband that will hold up to many years of hard use.
-
German Martingale Complete #CM1A
Price range: $453.00 through $477.00How it works: The key to any German Martingale is the release of pressure on the bit. The Y-cord on my German Martingale is made with a very tightly braided cord with a hard finish. This cord runs from the cinch, through the rings of the bit and connects to the reins at the Y cord rein knot (please see diagram). This cord releases immediately, with no drag, when you release finger-tip pressure on the reins. The horse learns to respond to pressure on the bit from this quick and rewarding release.
The neck strap on my German Martingale is long to give the correct angle from the cinch to the bit. This angle is very important in the training process because it encourages a horse to lower its neck from the withers before flexing at the poll. You will not find this angle on other German Martingales. The safety hobble on the neck strap goes through the gullet and over the horn to prevent the neck strap from sliding forward and getting caught behind the ears. Without the safety hobble pressure from the martingale sliding forward may cause a horse to rear up and possibly fall over backwards.
There is only one simple adjustment on my German Martingale; the adjustment knot that leads to the cinch snap. This can be adjusted so this Martingale fits any size horse correctly. This is a great tool to use on any age horse. It helps relax and collect a horse and helps eliminate dropped shoulders in preparation for advanced maneuvers.
A German Martingale needs to be used correctly and with caution. Always check a horse from the ground so they know the German Martingale is there before you get on. Do not let the horse drop its head to the ground because he can step through the martingale rein and cause an accident. When you dismount, immediately unsnap the martingale from the cinch.
Description: The complete German Martingale includes the #HS24 3/4″ Browband Headstall, your choice of the #17 Heavy Ring Snaffle with the #9 3/8th inch 2 piece mouthpiece, the #17 Heavy Ring Snaffle with the #42 3/16th inch twisted wire mouthpiece or the #18 Egg Butt Snaffle and your choice of 3 harness leather reins. The choice of reins includes: the #ASR6 DM Harness Leather Split Reins which are 6 1/2 to 7 feet and work well on the smaller horse, the #ASR3 XX Harness Leather Split Reins which are 7 to 7 1/2 feet and are a good length for the average horse of 14.2 to 16 hands, and the #ASR2 XXX Harness Leather Split Reins are 7 1/2 to 8 feet and work well on horses 16 hands and over.
Also shown on the horse is the #CA1 3/16th” Rope Cavesson with Rawhide Braided Nose. This cavesson is sold separately and not included in the price of the German Martingale.
Assistance from a professional is necessary to learn safe use of a German Martingale. If you’re not familiar with the proper use of a German Martingale, get the help of a professional trainer who is experienced with its use.
-
Chuck Frasier Sidepull #CP40
$271.00Description: The noseband on this sidepull is crafted from firm 3/8″ nylon rope, which is specially designed to ensure it lays correctly from the first ride. The headstall is made of single ply 3/4″ tight-fibered harness leather with a 5/8″ throat latch. This sidepull comes with slot conchos which are the safest and most secure conchos available. You can see the photos on the left for instructions on slot concho removal and application. The buckles on this Chuck Frasier Sidepull #CP40 are stainless steel with the leather below the buckles stitched to keep them in place.
How it works:
Since this sidepull is considered a bitless bridle, it is designed for use on the adult horse and is a great tool to avoid putting pressure on the horse’s mouth while maintaining plenty of control. With the design of this sidepull, the stainless-steel shanks come against the opposite side of the horse’s face with a direct rein pull so the horse starts his turns without leaning. Put your leg on him once the turn is started to teach him to complete the turn without leaning. The noseband in combination with the dog chain curb provides a strong signal to stop.Watch the video “The Secret to using the Chuck Frasier Sidepull” to learn more.
Shown with ASR3 XX Harness Leather Split Reins.
-
Leather Tiedown Strap #ZG
Price range: $67.00 through $72.00Description: Our Leather Tiedown Strap #ZG comes in both 3/4 inch and 1 inch widths (see dropdown). Both sizes are fully adjustable and made of single ply harness leather that has been edged, hand rubbed, treated with Neatsfoot Oil and hand rubbed again. Snaps and roller buckle are stainless steel. These are top of the line tiedown straps that you will be able to use for many years of hard daily work without problems.
-
Sidepull #CP38
$199.00Description: The noseband on the Sidepull #CP38 is made of 3/8 inch firm nylon rope specially designed to lay correctly from the first ride. The headstall is made of single ply, 3/4 inch, dense, tight-fibered harness leather and has a 5/8 inch throat latch. The leather has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles and rings are all stainless steel.
Reins: If you’d like to purchase reins for your Sidepull some of our most popular choices are the #ASR6 DM Harness Leather Split Reins, or the #BLL1 Latigo on Latigo 5/8″ medium weight reins. At 6 1/2 to 7 feet either of these reins will work well on the smaller colt or horse. At 7 to 7 1/2 feet, the #ASR3 XX Harness Leather Split Reins are a good choice for the bigger colt or horse (generally 15 to 16 hands). Many of our other reins can also be used on this Sidepull. Visit the rein category to purchase your choice of reins separately.
How it works: Sidepulls are a good piece of equipment to use for starting colts, or to transition colts to from a soft rope hackamore. Using a sidepull is a nice way to teach young horses to move through turns with their noses first without putting any pressure on their delicate mouths. Once the colt is turning well with direct pressure from the sidepull a trainer will move to the snaffle, hackamore or bosal.
Sidepull is shown with the #BLL1 Latigo on Latigo 5/8 inch Medium Wt 7 ft Reins.
