Chuck Frasier Sidepull #CP40
$271.00
Description: The noseband on this sidepull is crafted from firm 3/8″ nylon rope, which is specially designed to ensure it lays correctly from the first ride. The headstall is made of single ply 3/4″ tight-fibered harness leather with a 5/8″ throat latch. This sidepull comes with slot conchos which are the safest and most secure conchos available. You can see the photos on the left for instructions on slot concho removal and application. The buckles on this Chuck Frasier Sidepull #CP40 are stainless steel with the leather below the buckles stitched to keep them in place.
How it works:
Since this sidepull is considered a bitless bridle, it is designed for use on the adult horse and is a great tool to avoid putting pressure on the horse’s mouth while maintaining plenty of control. With the design of this sidepull, the stainless-steel shanks come against the opposite side of the horse’s face with a direct rein pull so the horse starts his turns without leaning. Put your leg on him once the turn is started to teach him to complete the turn without leaning. The noseband in combination with the dog chain curb provides a strong signal to stop.
Watch the video “The Secret to using the Chuck Frasier Sidepull” to learn more.
Shown with ASR3 XX Harness Leather Split Reins.
Related products
-
String Cavesson w/ Rawhide Knots #CA3
$69.00Description: The String Cavesson with Rawhide Knots #CA3 has a noseband made of tan 1/8 inch solid braid nylon cord. The adjustment knots at the bottom of the noseband are covered with handbraided rawhide pineapple knots. These knots allow the noseband to be quickly and easily adjusted to 19, 21 and 23 inches. This is nice if you have a number of horses to ride. The headstall is made of 1/2 inch burgundy latigo leather that has been edged and hand-rubbed. The buckle is beveled stainless steel with a leather loop keeper. The headstall leather under the buckle is hand sewn together to prevent the buckle from slipping when the headstall is adjusted. This cavesson lays so flat under your bridle you won’t know it is there!
Size Measurement: An easy way to be certain this cavesson will fit is to wrap a leadrope around the nose where the cavesson will lay, mark the leadrope with a magic marker, straighten it and then measure the leadrope. When measuring, be sure to wrap the leadrope loosely enough that the horse will have enough room between his nose and the cavesson to be comfortable and to be able to hold the bit. A good rule of thumb is 2 fingers width between the nose and cavesson (which is the diameter of most leadropes) if the horse is trained to a cavesson. This will fit any nose between approximately 19 and 23 inches.
This cavesson is a good all-around cavesson and can be used on colts if adjusted loosely when starting them in it.
For more information on cavesson fit and use visit: There’s More to a Cavesson than Meets the Eye: How and Why to Use Cavessons
-
1 3/4″ Hobble #H2
$126.00Description: The 1 3/4″ Hobble #H2 is handmade of doubled and stitched burgundy latigo leather with smooth handmade stainless steel squares. This is a stout hobble at 1 3/4 inches. The soft but strong latigo leather should not chafe your horse’s legs.
How it works: Many horses have been saved from severe injury when caught in wire because they were hobble trained. A horseman may also teach his or her horse to accept hobbles and sidelines so it won’t need to be tied or ground tied. When a horse is hobbled it won’t hurt its mouth with a jerk from a stepped on or looped rein. Hobbles and sidelines can also have a quieting effect on the horse’s mind. Investing in hobbles and their training can have big pay-backs.
Visit “Hobble Along” to read my Tack Talk article on proper and safe use of hobbles.
The first time you use the hobbles on your colt or horse, or while training the horse to accept hobbles, use a wide open sandy area. Do not put hobbles on in a confined space until they accept them easily and well. If you are not familiar with the use of hobbles seek help from a professional who is experienced with their use.
-
Bosal 1 Inch #HU4
$450.00Description: This 1 Inch Bosal is handmade with a very soft braid on braid nylon core making it easy on the jaws of a horse and a particularly good bosal for starting colts. Available with brown nylon spit reins or brown nylon mecate. (see dropdown)
Bosal size: The nose button is made of hand braided rawhide and is 7 inches in length and 5 inches in width between the hanger buttons. This bosal is available in 10 1/2 and 11 inch lengths from top to bottom. (see dropdown)
Heel knot: The heel knots on all Dennis Moreland Bosals are heavy to give instant release when the pressure on the mecate is released. This bosal has a spacer inside the heel knot, between the cores, which gives the mecate space to lay correctly. This is a very nice improvement over bosals with no spacer.
Hanger: This bosal comes with a handmade 3/8 inch Latigo California Style Hanger. The hangers are hand edged, rubbed and waxed.
-
Easy Stop #ES1
$229.00Description: The Easy Stop #ES1 is a very good piece of tack to use when you want to teach your horse to stop correctly when cued, without having to put pressure on the mouth. Often a horse will show a lot of improvement in it’s stop with just a few rides in the Easy Stop.
The noseband is made of 3/8 inch nylon rope that is specially designed to lay right from the first ride. The headstall is made of 3/4 inch dense, tight-fibered harness leather. The leather has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel and the leather beneath the buckles is hand stitched together to prevent the buckles from sliding down as you’re adjusting the headstall. This Easy Stop includes a hand-tied tan 1/4 inch nylon fiador tied to the top of the spoon so it won’t interfere with the reins.
Choice of Reins: Almost any of the reins we make will work well. If you don’t see what you need here, please see the rein category These reins can be purchased separately.
How it works: The Easy Stop noseband will apply pressure on the nose just like a hackamore or bosal. Additionally, the stainless steel Easy Stop spoon will come forward as the reins are pulled and make contact with the horse’s chin, in the space between the 2 jawbones (the intermandibular space). I carefully designed the angle of the Easy Stop spoon to function correctly and lay close enough to the horse’s intermandibular space that it doesn’t apply pressure until the reins are pulled. The edges of the spoon are smooth and have a gentle bevel so there’s nothing sharp touching your horse. This Easy Stop is designed so the spoon doesn’t flip over when there’s not any pressure on the reins.
This is used by top professional cutting, cow horse, reining and barrel horse trainers, among others, and will last through years of use. This is a real good tool to have in your tack room for those times when a horse is not responding as soon as he is being asked to stop. Your horse should be broke to give at the poll and should be flexible both laterally and longitudinally before being ridden with an easy stop.
Shown on the horse with the Easy Stop are a pair of XX Harness Leather Split Reins #ASR3.
If you are unfamiliar with the use of an Easy Stop, seek professional help before using it on your horse.
-
Sidepull #CP38
$199.00Description: The noseband on the Sidepull #CP38 is made of 3/8 inch firm nylon rope specially designed to lay correctly from the first ride. The headstall is made of single ply, 3/4 inch, dense, tight-fibered harness leather and has a 5/8 inch throat latch. The leather has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles and rings are all stainless steel.
Reins: If you’d like to purchase reins for your Sidepull some of our most popular choices are the #ASR6 DM Harness Leather Split Reins, or the #BLL1 Latigo on Latigo 5/8″ medium weight reins. At 6 1/2 to 7 feet either of these reins will work well on the smaller colt or horse. At 7 to 7 1/2 feet, the #ASR3 XX Harness Leather Split Reins are a good choice for the bigger colt or horse (generally 15 to 16 hands). Many of our other reins can also be used on this Sidepull. Visit the rein category to purchase your choice of reins separately.
How it works: Sidepulls are a good piece of equipment to use for starting colts, or to transition colts to from a soft rope hackamore. Using a sidepull is a nice way to teach young horses to move through turns with their noses first without putting any pressure on their delicate mouths. Once the colt is turning well with direct pressure from the sidepull a trainer will move to the snaffle, hackamore or bosal.
Sidepull is shown with the #BLL1 Latigo on Latigo 5/8 inch Medium Wt 7 ft Reins.
