Dog Bone Rawhide Noseband/Tiedown #T2
Price range: $121.00 through $193.00
Description: This Dog Bone Rawhide Noseband/Tiedown #T2 is made of 3/8 inch nylon rope with handbraided rawhide nose. The leather hanger has been edged, hand rubbed, treated with Neatsfoot Oil and hand rubbed again. The buckle is stainless steel with a hand braided rawhide keeper. The leather beneath the buckle is stitched together to keep the buckle in place when you adjust it between horses. The dog-bone is also stainless steel. Shown without a tiedown strap but available with your choice of a #ZG 1 inch or a 3/4 inch Leather Tie Down Strap or a #ZH Nylon Tie Down Strap (see dropdown to order).
How it works: You will like the way the rawhide feels on your horse’s nose and how much better your horse will respond to the rawhide if he’s been pushing on a leather tiedown. This tiedown will hold up to years of hard use.
Related products
-
Sidepull #CP38
$199.00Description: The noseband on the Sidepull #CP38 is made of 3/8 inch firm nylon rope specially designed to lay correctly from the first ride. The headstall is made of single ply, 3/4 inch, dense, tight-fibered harness leather and has a 5/8 inch throat latch. The leather has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles and rings are all stainless steel.
Reins: If you’d like to purchase reins for your Sidepull some of our most popular choices are the #ASR6 DM Harness Leather Split Reins, or the #BLL1 Latigo on Latigo 5/8″ medium weight reins. At 6 1/2 to 7 feet either of these reins will work well on the smaller colt or horse. At 7 to 7 1/2 feet, the #ASR3 XX Harness Leather Split Reins are a good choice for the bigger colt or horse (generally 15 to 16 hands). Many of our other reins can also be used on this Sidepull. Visit the rein category to purchase your choice of reins separately.
How it works: Sidepulls are a good piece of equipment to use for starting colts, or to transition colts to from a soft rope hackamore. Using a sidepull is a nice way to teach young horses to move through turns with their noses first without putting any pressure on their delicate mouths. Once the colt is turning well with direct pressure from the sidepull a trainer will move to the snaffle, hackamore or bosal.
Sidepull is shown with the #BLL1 Latigo on Latigo 5/8 inch Medium Wt 7 ft Reins.
-
1 3/4″ Hobble #H2
$126.00Description: The 1 3/4″ Hobble #H2 is handmade of doubled and stitched burgundy latigo leather with smooth handmade stainless steel squares. This is a stout hobble at 1 3/4 inches. The soft but strong latigo leather should not chafe your horse’s legs.
How it works: Many horses have been saved from severe injury when caught in wire because they were hobble trained. A horseman may also teach his or her horse to accept hobbles and sidelines so it won’t need to be tied or ground tied. When a horse is hobbled it won’t hurt its mouth with a jerk from a stepped on or looped rein. Hobbles and sidelines can also have a quieting effect on the horse’s mind. Investing in hobbles and their training can have big pay-backs.
Visit “Hobble Along” to read my Tack Talk article on proper and safe use of hobbles.
The first time you use the hobbles on your colt or horse, or while training the horse to accept hobbles, use a wide open sandy area. Do not put hobbles on in a confined space until they accept them easily and well. If you are not familiar with the use of hobbles seek help from a professional who is experienced with their use.
-
German Martingale Complete #CM1A
$527.00How it works: The key to any German Martingale is the release of pressure on the bit. The Y-cord on my German Martingale is made with a very tightly braided cord with a hard finish. This cord runs from the cinch, through the rings of the bit and connects to the reins at the Y cord rein knot (please see diagram). This cord releases immediately, with no drag, when you release finger-tip pressure on the reins. The horse learns to respond to pressure on the bit from this quick and rewarding release.
The neck strap on my German Martingale is long to give the correct angle from the cinch to the bit. This angle is very important in the training process because it encourages a horse to lower its neck from the withers before flexing at the poll. You will not find this angle on other German Martingales. The safety hobble on the neck strap goes through the gullet and over the horn to prevent the neck strap from sliding forward and getting caught behind the ears. Without the safety hobble pressure from the martingale sliding forward may cause a horse to rear up and possibly fall over backwards.
There is only one simple adjustment on my German Martingale; the adjustment knot that leads to the cinch snap. This can be adjusted so this Martingale fits any size horse correctly. This is a great tool to use on any age horse. It helps relax and collect a horse and helps eliminate dropped shoulders in preparation for advanced maneuvers.
A German Martingale needs to be used correctly and with caution. Always check a horse from the ground so they know the German Martingale is there before you get on. Do not let the horse drop its head to the ground because he can step through the martingale rein and cause an accident. When you dismount, immediately unsnap the martingale from the cinch.
Description: The complete German Martingale includes the #HS24 3/4″ Browband Headstall, your choice of the #17-9 Heavy Ring Snaffle with 3/8th inch 2 piece mouthpiece, the #17-42 Heavy Ring Snaffle with 3/16th inch twisted wire mouthpiece or the #18 Egg Butt Snaffle and your choice of 3 harness leather reins. The choice of reins includes: the #ASR6 DM Harness Leather Split Reins which are 6 1/2 to 7 feet and work well on the smaller horse, the #ASR3 XX Harness Leather Split Reins which are 7 to 7 1/2 feet and are a good length for the average horse of 14.2 to 16 hands, and the #ASR2 XXX Harness Leather Split Reins are 7 1/2 to 8 feet and work well on horses 16 hands and over.
Also shown on the horse is the #CA1 3/16th” Rope Cavesson with Rawhide Braided Nose. This cavesson is sold separately and not included in the price of the German Martingale.
Assistance from a professional is necessary to learn safe use of a German Martingale. If you’re not familiar with the proper use of a German Martingale, get the help of a professional trainer who is experienced with its use.
-
German Martingale with Roping Rein #CM1D
$126.00Description: The German Martingale with Roping Rein #CM1D is the same as the German #CM1A but comes with a roping rein instead of split reins. This martingale has no headstall or bit so you can add your own. The martingale is made of 1/4 inch tan nylon cord with a 1/2 inch latigo safety hobble strap. The roping rein has been edged, hand rubbed, oiled with Neatsfoot Oil and hand rubbed again.
How it Works: The key to the German martingale is the long neck strap giving a good line from the bit to the cinch. This allows the neck to lower from the withers before flexing at the poll. The 1/8 inch solid braid cord that runs through the bit to the reins has a high quality hard finish so slides very easily allowing a quick release. The release is more important than the pull but you have to pull to get the release. A horse learns from the release.
Assistance from a professional is necessary to learn safe use of a German martingale.
The martingale is a very useful tool to aid a horse in learning proper head position as he learns collection. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
The diagram shows the Complete German Martingale #CM1A. This German Martingale #CM1D comes with a roping rein and without headstall or bit.
-
String Running Martingale #CM4
$48.00Description: The String Running Martingale #CM4 is made of tan 1/4 inch nylon cord. The rings and swivel snap are stainless steel. The safety hobble strap goes through the gullet of the saddle and over the horn to prevent the neck strap from sliding to the ears. This martingale is adjustable both around the neck and to the cinch.
How it works: The running martingale is a very useful tool to aid a horse in learning proper head position as he learns collection. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as rider teaches the horse to drive from behind.
A good rule of thumb for adjustment is to allow horse to stand comfortably, attach snap to cinch D ring and extend ring straps until they reach the throatlatch.
