Leather Noseband/Tiedown #T8
Price range: $70.00 through $142.00
Description: The Leather Noseband Tiedown is made of 1 inch harness leather and lined with burgundy latigo leather. The leather has been edged, hand rubbed, treated with Neatsfoot Oil and hand rubbed again. The buckle is stainless steel with a leather keeper. The leather beneath the buckle is stitched together to keep the buckle in place when you adjust it between horses. The ring is also stainless steel. Shown without a tiedown strap but is available with your choice of a #ZG 1 inch or a 3/4 inch Leather Tie Down Strap or #ZH Nylon Tie Down Strap (see dropdown to order).
How it works: This is the softest noseband I make and will work really well on a sensitive horse or one that wants to use the noseband for balance rather than pushing on it or leaning into it. A very well made noseband that will hold up to many years of hard use.
Related products
-
German Martingale with Roping Rein #CM1D
$126.00Description: The German Martingale with Roping Rein #CM1D is the same as the German #CM1A but comes with a roping rein instead of split reins. This martingale has no headstall or bit so you can add your own. The martingale is made of 1/4 inch tan nylon cord with a 1/2 inch latigo safety hobble strap. The roping rein has been edged, hand rubbed, oiled with Neatsfoot Oil and hand rubbed again.
How it Works: The key to the German martingale is the long neck strap giving a good line from the bit to the cinch. This allows the neck to lower from the withers before flexing at the poll. The 1/8 inch solid braid cord that runs through the bit to the reins has a high quality hard finish so slides very easily allowing a quick release. The release is more important than the pull but you have to pull to get the release. A horse learns from the release.
Assistance from a professional is necessary to learn safe use of a German martingale.
The martingale is a very useful tool to aid a horse in learning proper head position as he learns collection. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
The diagram shows the Complete German Martingale #CM1A. This German Martingale #CM1D comes with a roping rein and without headstall or bit.
-
1″ Hobble #H1
$85.00Description: This 1″ Hobble #H1 is made of doubled and stitched burgundy latigo leather. The buckle is a stainless steel square top roller buckle and the rings are stainless steel. It is small enough to hang on your saddle rear D and stout enough to last for years.
How it works: This hobble works especially well for sacking out colts and patience training when used in combination with the #SL1 Bronc Sideline (shown on horse in picture). Hobbles are very good for teaching patience, trust in the handler, and responding correctly to pressure.
Many horses have been saved from severe injury when caught in wire because they were hobble trained. A horseman may also teach his or her horse to accept hobbles and sidelines so it won’t need to be tied or ground tied. When a horse is hobbled it won’t hurt its mouth with a jerk from a stepped on or looped rein. Hobbles and sidelines can also have a quieting effect on the horse’s mind. Investing in hobbles and their training can have big pay-backs.
To put a set of hobbles on:
1. Starting with the right front leg, wrap the end of the hobble strap clockwise around the leg and lace it through the first metal ring.
2. Lace the strap through the second ring.
3. Run the strap behind the left front leg.
4. Buckle the strap.
For more information on hobbles read my Tack Talk Article Hobble Along.
The first time you use the hobbles on your colt or horse, or while training the horse to accept hobbles, use a wide open sandy area. Do not put hobbles on in a confined space until they accept them easily and well. If you are not familiar with the use of hobbles seek help from a professional who is experienced with their use.
-
Sliding Running Martingale #CM3
$95.00Description: The Sliding Running Martingale #CM3 has a 3/4 inch adjustable neck strap made of heavy harness leather. Each end of the neck strap is stitched to a stainless steel ring. An adjustable tie down strap is sewn to the center of the neck strap ring on one end and snapped to the cinch on the other end. A second snap with a ring-end is snapped to the opposite side of the center ring of the neck strap. A heavy 1/4 inch nylon cord runs through the ring end of the snap. The nylon cord is 18 inches long and has rein rings at each end. An 1/2 inch latigo leather safety hobble strap with a slit on one end runs from the neck strap through the gullet of the saddle and over the horn. This safety hobble strap prevents the neck strap from sliding to the ears.
How it works: Running martingales are very useful tools to aid horses in learning proper head position as they learn collection. With this martingale, the sliding action of the nylon cord, occurring when the rider pulls on either rein, helps your horse maintain a correct frame as his head turns. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
-
Nylon Rope Cavesson w/Rawhide Braided Nose #CA1
$155.00Description: The noseband on this 3/16″ Nylon Rope Cavesson w/Rawhide Braided Nose #CA1 is made of round 3/16 inch rope. The nose button and heel knot are covered in hand braided rawhide. The headstall is made of 1/2 inch burgundy latigo leather with a leather loop keeper. The buckle is beveled stainless steel. The headstall leather just below the buckle is handsewn together to prevent the buckle from slipping when the headstall is adjusted. There are hand braided rawhide ring knots on the noseband to hold the headstall in place.
This cavesson comes in small (19 in.), medium (21 in.), large (23 in.) and extra large (25 in.) (see dropdown). In general a small will fit a horse under 14.2 hands and 900 lbs., a medium will fit a horse between 14.2 and 15 hands, a large will fit most horses between 15.1 and 16 hands and the extra large is for those over 16 hands.
Size Measurement: An easy way to be certain to get the correct cavesson size is to wrap a leadrope around the nose where the cavesson will lay, mark the leadrope with a magic marker, straighten it and then measure the leadrope. When measuring, be sure to wrap the leadrope loosely enough that the horse will have enough room between his nose and the cavesson to be comfortable and to be able to hold the bit. A good rule of thumb is 2 fingers width between the nose and cavesson (which is the diameter of most leadropes) if the horse is trained to a cavesson.
This is our favorite for a horse that has advanced beyond the leather and string cavessons. It gives the strongest signal of any of our cavessons. It looks good on a horse.
For more information on cavesson fit and use visit: There’s More to a Cavesson than Meets the Eye: How and Why to Use Cavessons
-
Sliding Gag Bit with Twisted Wire Snaffle #20-42
Price range: $200.00 through $253.00Description: This Dennis Moreland Tack Sliding Gag Bit with Twisted Wire Snaffle #20-42 is built with a center bar on the bit cheeks which limits the movement of the sliding mouthpiece to provide quicker action and instant relief. The hard lay nylon cord allows the bit to slide easily. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. The twisted wire mouthpiece gives a stronger signal than the common snaffle and is very good to use if your horse has become resistant to giving his nose and/or lowering his head. This snaffle should improve stops in a horse that is trying to run off. This Sliding Gag comes with your choice of a stainless steel twisted wire headstall or, for the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch browband headstall (see photo).
How it works: The simultaneous pressure on the mouth from the sliding gag bit and on the poll from the twisted, shaped, stainless steel or the leather crown increases control of the nose and improves total balancing power to produce the ultimate in vertical flexion and feel. Because your rein aids are strengthened with the gag, your leg cues given at the same time become reinforced and easier for the horse to respond to. You will be able to better concentrate on fine details of your training rather than large rebalancing or repositioning efforts regardless of your type of riding. This gag bridle is an excellent training tool for both young and older horses that need to improve flexibility and response. Your horse will learn that when it breaks at the poll the release will be instant, smooth, and consistent. Since these gags release so quickly your horse is not trapped in position while it waits for the release to occur. This helps horses stay calm and confident in training and also when they are in competition. The leather crown works well with this twisted wire mouthpiece on horses that want to drop their heads while continuing to pull on the bit.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
If you don’t have experience with sliding gags Dennis Moreland Tack recommends you seek the help of a professional who has experience as you are learning to use them.
