Straight Breast Collar #BC1
$199.00
Description: The Straight Breast Collar is made of 1 inch wide harness leather lined with burgundy latigo. I make this breastcollar with a sheepskin lined leather chafe under the ring. The adjustable hold down strap is 3/4 inch wide with a 3/4 inch snap and buckle piece to connect it to the cinch. The tug straps are 3/4 inch wide. The ring, dees, buckles and snap are all beveled stainless steel. The leather is hand edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. This breast collar is also available in 3/4 inch size for the “petite mare” (see dropdown). This is a top quality, very versatile, handmade breast collar you will be proud to own!
Related products
-
Roper Breast Collar #BC3
$273.00Description: The Roper Breast Collar #BC3 has a shaped rough-out harness leather body that tapers from 2 3/4 inches to 1 3/4 inches. The body is lined with burgundy latigo leather with a sheepskin lined chafe under the center dee. Tugs are 1 inch single ply leather. The adjustable hold down strap is doubled and stitched 3/4 inch harness leather with an easily adjustable buckle. Leather is edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. Ring, dees, buckles and snap are stainless steel. This heavy breast collar is stout and will last for years.
-
Easy Stop #ES1
$229.00Description: The Easy Stop #ES1 is a very good piece of tack to use when you want to teach your horse to stop correctly when cued, without having to put pressure on the mouth. Often a horse will show a lot of improvement in it’s stop with just a few rides in the Easy Stop.
The noseband is made of 3/8 inch nylon rope that is specially designed to lay right from the first ride. The headstall is made of 3/4 inch dense, tight-fibered harness leather. The leather has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel and the leather beneath the buckles is hand stitched together to prevent the buckles from sliding down as you’re adjusting the headstall. This Easy Stop includes a hand-tied tan 1/4 inch nylon fiador tied to the top of the spoon so it won’t interfere with the reins.
Choice of Reins: Almost any of the reins we make will work well. If you don’t see what you need here, please see the rein category These reins can be purchased separately.
How it works: The Easy Stop noseband will apply pressure on the nose just like a hackamore or bosal. Additionally, the stainless steel Easy Stop spoon will come forward as the reins are pulled and make contact with the horse’s chin, in the space between the 2 jawbones (the intermandibular space). I carefully designed the angle of the Easy Stop spoon to function correctly and lay close enough to the horse’s intermandibular space that it doesn’t apply pressure until the reins are pulled. The edges of the spoon are smooth and have a gentle bevel so there’s nothing sharp touching your horse. This Easy Stop is designed so the spoon doesn’t flip over when there’s not any pressure on the reins.
This is used by top professional cutting, cow horse, reining and barrel horse trainers, among others, and will last through years of use. This is a real good tool to have in your tack room for those times when a horse is not responding as soon as he is being asked to stop. Your horse should be broke to give at the poll and should be flexible both laterally and longitudinally before being ridden with an easy stop.
Shown on the horse with the Easy Stop are a pair of XX Harness Leather Split Reins #ASR3.
If you are unfamiliar with the use of an Easy Stop, seek professional help before using it on your horse.
-
3/4″ Short Cheek Browband Headstall #HS25
$145.00Description: The 3/4 Inch Short Cheek Browband Headstall #HS25 is made of heavy single ply harness leather, 3/4 inches wide. The leather has been hand-edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The browband is doubled and stitched. The throatlatch is made of 5/8 inch single ply leather. All the buckles are beveled stainless steel with leather loop keepers. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping which helps make this headstall so nice to adjust to fit different horses. This is a very durable headstall that will last through years of hard use. This is the perfect headstall to ride with any bit and it’s nice enough to go anywhere and look good.
How it works: The cheek pieces on this headstall are shorter than average and shorter than the similar #HS24 headstall. The shorter cheeks assure that the buckle pieces will not get close to the horse’s eyes. This is especially nice on the horse with a small head but works well on any size horse. This headstall is available in 2 sizes (see dropdown). The small horse size has a 33″ crown to fit horses 15 hands and under and the large horse comes with a 36″ crown and is designed to fit horses over 15 hands.
Available with your choice of slot concho, concho or tie string bit ends (see dropdown).
Shown with slot conchos.
-
Doubled and Stitched Two Buckle Headstall #HS33
$119.99Description: The Doubled and Stitched Two Buckle Slide Ear Headstall #HS33 is made of 5/8 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. This headstall is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The beveled buckles are stainless steel. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. The crown piece on this headstall comes in 2 sizes: 36 inches in length for those horses 15 hands and under and 40 inches for those over 15 hands (see dropdown for choices).
How it works: The buckle pieces on this headstall are extra short to keep the buckles away from the horse’s eyes. This doubled & stitched headstall is not thicker than a single ply leather headstall and has that good feel in your hands and on the horse.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thicknesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance.
The headstall has teardrop bit ends with your choice of slot conchos, tie ends, or conchos (see dropdown).
Shown with slot conchos.
-
Doubled and Stitched Slot Ear Headstall #HS31
$99.99Description: The Doubled and Stitched One Buckle Slot Ear Headstall #HS31 is made of 5/8 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. The headstall has a beveled stainless steel adjustment buckle. The leather beneath the buckle is handsewn together to keep the buckle from slipping. The headstall has been edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again.
How it works: The short cheek piece on this headstall keeps the buckle away from the horse’s eye. The slot ear is sized right to fit small and large horses. This is such a nice easy headstall to slip on a horse and be on your way.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thicknesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance. The doubled & stitched items are not thicker than single ply leather so still have that good feel in your hands and on the horse. “Matlock Rose designed the pattern for this headstall which he used on every horse he rode. In 1976 he gave the pattern to me. I have produced this headstall since that time and it’s always been my favorite doubled and stitched headstall.” Dennis
The headstall has teardrop bit ends with your choice of slot conchos, tie ends, or conchos (see dropdown).
Shown with slot conchos.
