Replacement Tugs for Breast Collars #ZF
Price range: $61.00 through $72.00
Description: These Replacement Tugs for Breast Collars #ZF are made of single ply, dense, tight-fibered racetrack harness leather. Racetrack leather is pliable yet very durable and is the best leather we can buy. The tugs have been edged, hand-rubbed, oiled with Neatsfoot Oil and rubbed again. The buckles and loops are stainless steel with leather keepers. Available in 3/4 inch and 1 inch widths (see drop down). Price listed is per pair. These will hold up to daily hard work.
Related products
-
3/4″ Two Buckle Slide Ear Headstall #HS23
$118.00Description: The 3/4 Inch Two Buckle Slide Ear Headstall #HS23 is made of single ply heavy harness leather that is 3/4 inch wide and is designed with teardrop bit ends The sliding ear piece on this headstall is doubled and stitched. The leather is hand-edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles are beveled stainless steel. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. They’re always right where you need them when you adjust the size of the headstall for another horse.
This headstall is available in 3 sizes (see dropdown). The small horse size has a 28 inch crown and is designed to fit horses under 14 1/2 hands. The average horse size has a 33 inch crown to fit horses approximately 14 1/2 to 15 1/2 hands. The large horse size comes with a 36 inch crown and is designed to fit horses over 15 1/2 hands.
Like the#HS13 5/8 Inch Two Buckle Slide Ear this is a great headstall for any discipline with a shank bit. It comes with your choice of slot conchos, conchos or tie string bit ends (see dropdown).
Shown with slot conchos.
-
Doubled and Stitched Browband Headstall #HS34
$140.99Description: The Doubled and Stitched Browband Headstall is made of 3/4 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. The headstall has beveled stainless steel adjustment buckles with leather keepers on each cheek. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. The throatlatch is 5/8 inch racetrack leather. The headstall has been edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The crown piece on this headstall comes in 2 sizes: 36 inches in length for those horses 16 hands and under and 40 inches for those over 16 hands (see dropdown for choices). This is a general size recommendation and works for most horses.
How it works: The short cheek pieces on this headstall keep the buckles away from the horse’s eyes. This doubled & stitched headstall is not thicker than a single ply leather headstall and will have that good feel in your hands and on the horse. A beautiful hard-working headstall made to fit a horse. The #BC1 Straight Breastcollar looks real good with this headstall and is a nice combination for the Versatility Ranch shows.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thickesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance.
Bit ends are tear drop shaped with your choice of slot conchos, conchos or tie ends (see dropdown).
Shown with slot conchos.
-
3/4″ Split Ear Headstall #HS12
$85.00Description: The 3/4 Inch Split Ear Headstall is made of single ply 3/4 inch heavy harness leather. This headstall has an extra-long ear split so it easily adjusts to fit any size horse, big and small. As a matter of fact it fits bigger horses better than any of my other headstalls. The buckle is beveled stainless steel with a leather loop keeper. The leather beneath the buckle is hand sewn together to prevent the buckle from slipping. The headstall has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The 3/4 Inch Split Ear is designed with teardrop bit ends.
Available with your choice of tie end, slot concho or concho bit ends (see dropdown). Slot conchos are the safest way to attach a headstall to a bit, I highly recommend the slot concho. Dennis
Shown with slot conchos.
-
Roper Breast Collar #BC3
$273.00Description: The Roper Breast Collar #BC3 has a shaped rough-out harness leather body that tapers from 2 3/4 inches to 1 3/4 inches. The body is lined with burgundy latigo leather with a sheepskin lined chafe under the center dee. Tugs are 1 inch single ply leather. The adjustable hold down strap is doubled and stitched 3/4 inch harness leather with an easily adjustable buckle. Leather is edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. Ring, dees, buckles and snap are stainless steel. This heavy breast collar is stout and will last for years.
-
Basket Stamped Browband Headstall #HS43
$163.00Description: The Basket Stamped Browband Headstall is made of 3/4 inch double and stitched skirting leather. The buckles on each cheek piece are beveled stainless steel and have hand braided rawhide loop keepers. The extra hand stitching just below each buckle prevents them from slipping. The throatlatch is 5/8 inch leather. Doubled and stitched leather is more durable and longer lasting than single ply leather but not thicker so will still have that good feel in your hands and on the horse.
Crafting: To make a doubled and stitched stamped headstall I take 2 pieces of skirting leather and split them to the correct thicknesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together and the basket weave pattern is stamped.
This is a beautiful handmade headstall for all disciplines. Available with your choice of slot concho, concho, or tie string bit ends (see dropdown).
Shown with slot conchos.
