Sliding Gag Bit with Snaffle Mouthpiece #20-9
$200.00 – $253.00Price range: $200.00 through $253.00
Description: This Sliding Gag Bit with Snaffle Mouthpiece #20-9 comes with a 3/8 inch common snaffle and your choice of 3 headstalls. The Two Piece Snaffle works to give you a smooth, quick and more consistent response when you ask your horse to give its head. This custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on the cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
The stainless steel twisted wire headstall is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are available (see dropdown to select).
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The draw gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
You may also order the Gag Bit with a twisted wire mouthpiece: #20-42 Sliding Gag w/Twisted Wire Snaffle.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
Related products
-

Double Buckle Curb Strap with Rawhide Ball #CU42
$72.00Description: This eye-catching Double Buckle Curb Strap with Rawhide Ball #CU42 is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. Beautiful hand braided rawhide keepers and a ball knot are added to complete the look. The buckles are stainless steel. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping during adjustments.
How it works: The rawhide ball gives a quicker signal than a flat leather curb as it comes in contact with the chin before the leather. The braided rawhide also gives a stronger signal than plain leather because of it’s texture. This curb may be really helpful on a horse that isn’t responding to the pull on the reins as well as it should. The rawhide ball will release very quickly once the tension on the reins is released allowing a reward for the desired response immediately..
Please see my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
-

3/4″ Browband Headstall #HS24
$145.00Description: The 3/4 Inch Browband Headstall #HS24 is made of heavy single ply harness leather, 3/4 inches wide. The leather has been hand-edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The browband is doubled and stitched which helps give this headstall a very eye-catching appearance. The throatlatch is made of 5/8 inch single ply leather. All the buckles are beveled stainless steel with leather loop keepers. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping which helps make this headstall so nice to adjust to fit different horses. This is a very durable headstall that will last through years of hard use. This is the perfect headstall to ride with any bit and it’s nice enough to go anywhere and look good.
This headstall is available in 3 sizes (see dropdown). The small horse size has a 28 inch crown and is designed to fit horses under 14 1/2 hands. The average horse size has a 33 inch crown to fit horses approximately 14 1/2 to 15 1/2 hands. The large horse size comes with a 36 inch crown and is designed to fit horses over 15 1/2 hands.
Available with your choice of slot concho, concho or tie string bit ends (see dropdown).
Shown with slot conchos.
-

Doubled and Stitched Slot Ear Headstall #HS31
$99.99Description: The Doubled and Stitched One Buckle Slot Ear Headstall #HS31 is made of 5/8 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. The headstall has a beveled stainless steel adjustment buckle. The leather beneath the buckle is handsewn together to keep the buckle from slipping. The headstall has been edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again.
How it works: The short cheek piece on this headstall keeps the buckle away from the horse’s eye. The slot ear is sized right to fit small and large horses. This is such a nice easy headstall to slip on a horse and be on your way.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thicknesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance. The doubled & stitched items are not thicker than single ply leather so still have that good feel in your hands and on the horse. “Matlock Rose designed the pattern for this headstall which he used on every horse he rode. In 1976 he gave the pattern to me. I have produced this headstall since that time and it’s always been my favorite doubled and stitched headstall.” Dennis
The headstall has teardrop bit ends with your choice of slot conchos, tie ends, or conchos (see dropdown).
Shown with slot conchos.
-

Nylon Curb Strap with Chain #CU20
$16.00Description: The Nylon Curb Strap #CU20 is made with 1/8 inch nylon cord ties and a stainless steel dog chain. This is a great functioning curb and works well for the budget minded horseman.
How it works: This curb gives a strong signal. Check your knots after you tie this to your bit to make certain they are holding securely.
Please visit my tack talk article “Curb Your Enthusiasm” to learn more.



