5/8″ Nylon Lead Rope with Snap #ALR4
$35.00
Description: This 5/8″ Nylon Lead Rope with Snap #ALR4 is made of white medium lay 5/8″ nylon rope with a stainless steel bull snap that’s hand braided/spliced in. The tail is braided back to prevent unraveling. The length is 10 feet before braiding, making it approximately 9 ft. 4 in. when it’s finished. The 5/8 inch nylon makes a good, stout, lead rope with plenty of flexibility to tie easily. You can read how to properly tie a lead rope by clicking: Take Me To Your Lead Rope.
Related products
-
Sliding Running Martingale #CM3
$95.00Description: The Sliding Running Martingale #CM3 has a 3/4 inch adjustable neck strap made of heavy harness leather. Each end of the neck strap is stitched to a stainless steel ring. An adjustable tie down strap is sewn to the center of the neck strap ring on one end and snapped to the cinch on the other end. A second snap with a ring-end is snapped to the opposite side of the center ring of the neck strap. A heavy 1/4 inch nylon cord runs through the ring end of the snap. The nylon cord is 18 inches long and has rein rings at each end. An 1/2 inch latigo leather safety hobble strap with a slit on one end runs from the neck strap through the gullet of the saddle and over the horn. This safety hobble strap prevents the neck strap from sliding to the ears.
How it works: Running martingales are very useful tools to aid horses in learning proper head position as they learn collection. With this martingale, the sliding action of the nylon cord, occurring when the rider pulls on either rein, helps your horse maintain a correct frame as his head turns. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
-
German Martingale Complete #CM1A
$527.00How it works: The key to any German Martingale is the release of pressure on the bit. The Y-cord on my German Martingale is made with a very tightly braided cord with a hard finish. This cord runs from the cinch, through the rings of the bit and connects to the reins at the Y cord rein knot (please see diagram). This cord releases immediately, with no drag, when you release finger-tip pressure on the reins. The horse learns to respond to pressure on the bit from this quick and rewarding release.
The neck strap on my German Martingale is long to give the correct angle from the cinch to the bit. This angle is very important in the training process because it encourages a horse to lower its neck from the withers before flexing at the poll. You will not find this angle on other German Martingales. The safety hobble on the neck strap goes through the gullet and over the horn to prevent the neck strap from sliding forward and getting caught behind the ears. Without the safety hobble pressure from the martingale sliding forward may cause a horse to rear up and possibly fall over backwards.
There is only one simple adjustment on my German Martingale; the adjustment knot that leads to the cinch snap. This can be adjusted so this Martingale fits any size horse correctly. This is a great tool to use on any age horse. It helps relax and collect a horse and helps eliminate dropped shoulders in preparation for advanced maneuvers.
A German Martingale needs to be used correctly and with caution. Always check a horse from the ground so they know the German Martingale is there before you get on. Do not let the horse drop its head to the ground because he can step through the martingale rein and cause an accident. When you dismount, immediately unsnap the martingale from the cinch.
Description: The complete German Martingale includes the #HS24 3/4″ Browband Headstall, your choice of the #17-9 Heavy Ring Snaffle with 3/8th inch 2 piece mouthpiece, the #17-42 Heavy Ring Snaffle with 3/16th inch twisted wire mouthpiece or the #18 Egg Butt Snaffle and your choice of 3 harness leather reins. The choice of reins includes: the #ASR6 DM Harness Leather Split Reins which are 6 1/2 to 7 feet and work well on the smaller horse, the #ASR3 XX Harness Leather Split Reins which are 7 to 7 1/2 feet and are a good length for the average horse of 14.2 to 16 hands, and the #ASR2 XXX Harness Leather Split Reins are 7 1/2 to 8 feet and work well on horses 16 hands and over.
Also shown on the horse is the #CA1 3/16th” Rope Cavesson with Rawhide Braided Nose. This cavesson is sold separately and not included in the price of the German Martingale.
Assistance from a professional is necessary to learn safe use of a German Martingale. If you’re not familiar with the proper use of a German Martingale, get the help of a professional trainer who is experienced with its use.
-
German Martingale with Roping Rein #CM1D
$126.00Description: The German Martingale with Roping Rein #CM1D is the same as the German #CM1A but comes with a roping rein instead of split reins. This martingale has no headstall or bit so you can add your own. The martingale is made of 1/4 inch tan nylon cord with a 1/2 inch latigo safety hobble strap. The roping rein has been edged, hand rubbed, oiled with Neatsfoot Oil and hand rubbed again.
How it Works: The key to the German martingale is the long neck strap giving a good line from the bit to the cinch. This allows the neck to lower from the withers before flexing at the poll. The 1/8 inch solid braid cord that runs through the bit to the reins has a high quality hard finish so slides very easily allowing a quick release. The release is more important than the pull but you have to pull to get the release. A horse learns from the release.
Assistance from a professional is necessary to learn safe use of a German martingale.
The martingale is a very useful tool to aid a horse in learning proper head position as he learns collection. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
The diagram shows the Complete German Martingale #CM1A. This German Martingale #CM1D comes with a roping rein and without headstall or bit.
-
Easy Stop #ES1
$229.00Description: The Easy Stop #ES1 is a very good piece of tack to use when you want to teach your horse to stop correctly when cued, without having to put pressure on the mouth. Often a horse will show a lot of improvement in it’s stop with just a few rides in the Easy Stop.
The noseband is made of 3/8 inch nylon rope that is specially designed to lay right from the first ride. The headstall is made of 3/4 inch dense, tight-fibered harness leather. The leather has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel and the leather beneath the buckles is hand stitched together to prevent the buckles from sliding down as you’re adjusting the headstall. This Easy Stop includes a hand-tied tan 1/4 inch nylon fiador tied to the top of the spoon so it won’t interfere with the reins.
Choice of Reins: Almost any of the reins we make will work well. If you don’t see what you need here, please see the rein category These reins can be purchased separately.
How it works: The Easy Stop noseband will apply pressure on the nose just like a hackamore or bosal. Additionally, the stainless steel Easy Stop spoon will come forward as the reins are pulled and make contact with the horse’s chin, in the space between the 2 jawbones (the intermandibular space). I carefully designed the angle of the Easy Stop spoon to function correctly and lay close enough to the horse’s intermandibular space that it doesn’t apply pressure until the reins are pulled. The edges of the spoon are smooth and have a gentle bevel so there’s nothing sharp touching your horse. This Easy Stop is designed so the spoon doesn’t flip over when there’s not any pressure on the reins.
This is used by top professional cutting, cow horse, reining and barrel horse trainers, among others, and will last through years of use. This is a real good tool to have in your tack room for those times when a horse is not responding as soon as he is being asked to stop. Your horse should be broke to give at the poll and should be flexible both laterally and longitudinally before being ridden with an easy stop.
Shown on the horse with the Easy Stop are a pair of XX Harness Leather Split Reins #ASR3.
If you are unfamiliar with the use of an Easy Stop, seek professional help before using it on your horse.
-
Adjustable String Cavesson #CA2
$43.00Description: The noseband on this Adjustable String Cavesson #CA2 is made of tan 1/8 inch solid braid nylon cord. The adjustment knots at the bottom allow the noseband to be quickly changed between horses to 19, 21 or 23 inches. The headstall is made of 1/2 inch burgundy latigo leather that has been edged and hand-rubbed. The buckle is beveled stainless steel with a leather loop keeper. This cavesson lays flat under your bridle and will last for years of hard use.
Size Measurement: An easy way to be certain this cavesson will fit is to wrap a leadrope around the nose where the cavesson will lay, mark the leadrope with a magic marker, straighten it and then measure the leadrope. When measuring, be sure to wrap the leadrope loosely enough that the horse will have enough room between his nose and the cavesson to be comfortable and to be able to hold the bit. A good rule of thumb is 2 fingers width between the nose and cavesson (which is the diameter of most leadropes) if the horse is trained to a cavesson.
This cavesson is a good all-around cavesson and can be used on colts if adjusted loosely when starting them in it.
For more information on cavesson fit and use visit: There’s More to a Cavesson than Meets the Eye: How and Why to Use Cavessons
