Double Buckle Leather Curb Strap #CU21
$36.00
Description: My Double Buckle Leather Curb Strap is a really good all around curb that is both AQHA legal and NRCHA legal on a bridle. This curb is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel. The leather under the buckles is hand stitched together to prevent the buckles from slipping out of position.
How it works: This curb gives a mild and very consistent signal. It’s made of quality leather that doesn’t stretch or get limber with use. The holes are precisely punched to be the same on each side of the curb. This is a real easy curb to adjust and has plenty of adjustment for any bit and any size horse.
Visit my Tack Talk article “Curb Your Enthusiasm” to learn more about curbs.
Related products
-
Nylon Curb Strap with Chain #CU20
$16.00Description: The Nylon Curb Strap #CU20 is made with 1/8 inch nylon cord ties and a stainless steel dog chain. This is a great functioning curb and works well for the budget minded horseman.
How it works: This curb gives a strong signal. Check your knots after you tie this to your bit to make certain they are holding securely.
Please visit my tack talk article “Curb Your Enthusiasm” to learn more.
-
Sliding Gag Bit with Snaffle Mouthpiece #20-9
Price range: $200.00 through $253.00Description: This Sliding Gag Bit with Snaffle Mouthpiece #20-9 comes with a 3/8 inch common snaffle and your choice of 3 headstalls. The Two Piece Snaffle works to give you a smooth, quick and more consistent response when you ask your horse to give its head. This custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on the cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
The stainless steel twisted wire headstall is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are available (see dropdown to select).
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The draw gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
You may also order the Gag Bit with a twisted wire mouthpiece: #20-42 Sliding Gag w/Twisted Wire Snaffle.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
-
Eggbutt Snaffle Bit #18
$150.00Description: The Eggbutt Snaffle Bit #18 is made of Stainless Steel. The mouthpiece is 5 1/8 inches wide, slightly bowed and has inlaid copper strips to increase salivation. It is 3/8th inch in diameter at the corners of the mouth and gradually tapers to 1/4 inch in the center.
How it works: When each rein is pulled the eggbutt snaffle bit will give a clearer signal than a ring snaffle because there is a larger area of contact on the corner of the mouth and contact on the opposite side of the face. This helps the colt to bring his whole face through the turn rather than just his nose. This bit is NRCHA & AQHA legal.
This is my favorite snaffle and I use it on almost all my young horses. Dennis
Shown on the horse in addition to the Eggbutt Snaffle is the #HS34 Doubled and Stitched Browband Headstall, the #CU31 Single Buckle Leather Curb and the #BLL2 Latigo on Latigo 5/8″ Heavy Reins.
-
Curb Strap with Dog Chain #CU11
$33.00Description: The straps on this Curb Strap with Dog Chain #CU11 are made of two 1/2 inch pieces of harness leather that are hand-edged, hand-rubbed and waxed. A 4 inch piece of chain is attached between the straps. The beveled buckles, dog chain and wire loops are made of stainless steel.
How it works: This curb delivers a strong signal and is the strongest of all the chain curbs I make.
To learn more about curbs visit my Tack Talk article “Curb Your Enthusiasm“.
-
Sliding Gag Bit with Twisted Wire Snaffle #20-42
Price range: $200.00 through $253.00Description: This Dennis Moreland Tack Sliding Gag Bit with Twisted Wire Snaffle #20-42 is built with a center bar on the bit cheeks which limits the movement of the sliding mouthpiece to provide quicker action and instant relief. The hard lay nylon cord allows the bit to slide easily. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. The twisted wire mouthpiece gives a stronger signal than the common snaffle and is very good to use if your horse has become resistant to giving his nose and/or lowering his head. This snaffle should improve stops in a horse that is trying to run off. This Sliding Gag comes with your choice of a stainless steel twisted wire headstall or, for the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch browband headstall (see photo).
How it works: The simultaneous pressure on the mouth from the sliding gag bit and on the poll from the twisted, shaped, stainless steel or the leather crown increases control of the nose and improves total balancing power to produce the ultimate in vertical flexion and feel. Because your rein aids are strengthened with the gag, your leg cues given at the same time become reinforced and easier for the horse to respond to. You will be able to better concentrate on fine details of your training rather than large rebalancing or repositioning efforts regardless of your type of riding. This gag bridle is an excellent training tool for both young and older horses that need to improve flexibility and response. Your horse will learn that when it breaks at the poll the release will be instant, smooth, and consistent. Since these gags release so quickly your horse is not trapped in position while it waits for the release to occur. This helps horses stay calm and confident in training and also when they are in competition. The leather crown works well with this twisted wire mouthpiece on horses that want to drop their heads while continuing to pull on the bit.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
If you don’t have experience with sliding gags Dennis Moreland Tack recommends you seek the help of a professional who has experience as you are learning to use them.
