Double Buckle Curb Strap with Rawhide #CU41
$72.00
Description: The Double Buckle Curb Strap with Rawhide #CU41 is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. Beautiful hand braided rawhide keepers and flat rawhide braid at the chin are added to complete the look. The buckles are stainless steel. The leather beneath the buckles is sewn together to prevent the buckles from slipping during adjustments.
How it works: The braided rawhide at the chin gives a quicker signal than a leather curb. It comes in contact with the chin slightly before the leather. The braided rawhide also gives a stronger signal than plain leather because of it’s texture. This curb may be really helpful on a horse that isn’t responding to the pull on the reins as well as it should with a leather curb. This curb gives a stronger, quicker signal than a leather curb but not as strong as the Double Buckle Curb Strap with Rawhide Ball #CU42.
Please see my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
Related products
-
Double Buckle Curb Strap with Rawhide Ball #CU42
$72.00Description: This eye-catching Double Buckle Curb Strap with Rawhide Ball #CU42 is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. Beautiful hand braided rawhide keepers and a ball knot are added to complete the look. The buckles are stainless steel. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping during adjustments.
How it works: The rawhide ball gives a quicker signal than a flat leather curb as it comes in contact with the chin before the leather. The braided rawhide also gives a stronger signal than plain leather because of it’s texture. This curb may be really helpful on a horse that isn’t responding to the pull on the reins as well as it should. The rawhide ball will release very quickly once the tension on the reins is released allowing a reward for the desired response immediately..
Please see my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
-
8″ Aluminum Shanked Bit #B8
Price range: $199.00 through $228.00Description: The 8″ shanks on this bit are made of aluminum. They are lighter weight than a steel bit which makes this a milder bit than a steel bit. It’s designed so the junction at the mouthpiece and shanks will never pinch a horse.
This bit is available with your choice of 9 mouthpieces. All the mouthpieces are 5 1/8 inches wide (see picture). All except the #0 Mouthpiece are made of steel with inlaid copper strips to promote salivation. The #0 Mouthpiece is made of soft rubber. The #1 Correction Mouthpiece and the #1W Solid Port Mouthpiece are 3/8 inch in diameter, the remainder are 7/16 inch in diameter. Make your selection in the dropdown.
This bit comes with the #BH51 3/8 inch Latigo Leather Bit Hobble, shown here.
How it works: Bits with aluminum shanks are milder than steel bits because of their light weight. This bit offers the ultimate in feel and control when you need a light touch but want the quick signal the 8 inch shanks provide. This is a nice switch when a horse needs a softer signal than a steel bit and it helps promote relaxation in a tense horse. It’s also great to lope in before showing. Many horses can be ridden continuously in this bit.
Shown is the late Mr. Gary Gonsalves riding Reyzin The Cash in the 2016 NCHA Super Stakes Finals with this Aluminum Shank Bit, Curb Strap with Flat Chain #CU10 and XXX Harness Leather Split Reins #ASR2. Photo courtesy of Mark Michels.
Bit is shown with mouthpiece #4F.
-
Bill Riddle Sideline #SL2
Price range: $97.00 through $106.00Description: The Bill Riddle Sideline #SL2 is made of two doubled and stitched burgundy latigo leather cuffs with easy on/easy off closures. These cuffs are 1 3/4 inch wide and connected by your choice of 24, 30 or 36 inch (see dropdown) pieces of soft white nylon rope. The rectangles and Dees are made of smooth round stainless steel rod.
How it works: This is a very helpful piece of equipment to use when you are sacking out a colt, teaching a young horse to stand hobbled or wanting to keep a horse from kicking in the trailer. You can prevent a horse that kicks in the trailer from hurting himself or damaging the trailer by using this sideline on just the left side or right side legs or use two sidelines and cross them between the legs. Sidelines and hobbles can both have a quieting effect on a horse’s mind.
The first time you use the sideline on your horse or while training the horse to accept them use a wide open sandy area. Do not put it on in the trailer or other confined space until they accept the sideline easily and well.
-
Sliding Gag Bit with Snaffle Mouthpiece #20-9
Price range: $200.00 through $253.00Description: This Sliding Gag Bit with Snaffle Mouthpiece #20-9 comes with a 3/8 inch common snaffle and your choice of 3 headstalls. The Two Piece Snaffle works to give you a smooth, quick and more consistent response when you ask your horse to give its head. This custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on the cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
The stainless steel twisted wire headstall is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are available (see dropdown to select).
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The draw gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
You may also order the Gag Bit with a twisted wire mouthpiece: #20-42 Sliding Gag w/Twisted Wire Snaffle.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
-
Steel C Shank Bit with Silver #A4
Price range: $451.00 through $566.00Description: The bit has “Buster Welch” style 6 1/2 inch shanks made of high quality 4130 grade steel and overlaid with beautiful hand engraved nickel silver. Four mouthpieces are available (see pictures). All mouthpieces are 5 1/8 inch wide, are made of steel or steel and copper, have inlaid copper strips to promote salivation, and are made in the diameters listed in pictures and dropdown. The bit comes with the #BH51 3/8 inch Latigo Leather Bit Hobble as shown.
How it works: The angle of this shank allows time for the horse to respond to the reins being adjusted (pulled) before the mouthpiece contacts the sides of the mouth, tongue and roof of the mouth and the curb strap makes contact with the chin or vice-versa when the reins are released. This truly is a great little shank! Almost all horses respond to this shank with confidence and contentment. This is a favorite with professional horsemen.
Shown on sorrel horse in addition to the #A4 Steel C Shank Bit is the #HU1 Bosalita 1/2 Inch, the #DMR3 Round 3/8 inch Nylon Mecate, and the #BC2 Shaped Breast Collar, custom stamped.
