Barely Legal Mullen D-Ring Snaffle
$250.00
Description: Handmade mullen D-ring snaffle with a 5/16″ beveled mouthpiece. The fine mouthpiece gives a light, quick signal, and the fixed D rings keep the bit steady and help with lateral guidance. Built by hand in Texas.
AQHA, NRCHA and NRHA legal.
Related products
-

Curb Strap with Dog Chain #CU11
$33.00Description: The straps on this Curb Strap with Dog Chain #CU11 are made of two 1/2 inch pieces of harness leather that are hand-edged, hand-rubbed and waxed. A 4 inch piece of chain is attached between the straps. The beveled buckles, dog chain and wire loops are made of stainless steel.
How it works: This curb delivers a strong signal and is the strongest of all the chain curbs I make.
To learn more about curbs visit my Tack Talk article “Curb Your Enthusiasm“.
-

Curb Strap with Flat Chain #CU10
$33.00Description: This Curb Strap with Flat Chain #CU10 is made of an 1/2 inch wide chain attached between two 1/2 inch burgundy latigo leather straps that are hand-edged, hand-rubbed and waxed. The curb can be attached to the bit with the chain flat or with the chain in a twisted position. The beveled buckles, chain and wire loops are all made of stainless steel. This curb is AQHA legal when attached with the chain in the flat position.
How it works: The flat chain gives a stronger signal on the chin when the reins are tightened than any of the leather curbs. If the chain is attached in the twisted position the signal becomes even stronger (but is then not legal in AQHA shows).
See my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
-

Double Buckle Leather Curb Strap #CU21
$36.00Description: My Double Buckle Leather Curb Strap is a really good all around curb that is both AQHA legal and NRCHA legal on a bridle. This curb is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel. The leather under the buckles is hand stitched together to prevent the buckles from slipping out of position.
How it works: This curb gives a mild and very consistent signal. It’s made of quality leather that doesn’t stretch or get limber with use. The holes are precisely punched to be the same on each side of the curb. This is a real easy curb to adjust and has plenty of adjustment for any bit and any size horse.
Visit my Tack Talk article “Curb Your Enthusiasm” to learn more about curbs.
-

Offset D Ring Snaffle Bit #19
$150.00Description: The D rings on this Offset D Ring Snaffle Bit are made of 1/4 inch steel and are 2 1/4 inches in diameter. Mouthpiece #9 is 3/8 inch in diameter and 5 1/8th inches wide with inlaid copper bars to promote salivation. Mouthpiece #42 is 3/16 inch in diameter and 5 /8 inches wide with a gentle twist.
How it works: Because the D rings on this snaffle don’t slide and the area of contact on the mouth is wider than on a ring snaffle this bit gives a stronger, quicker signal than a ring snaffle. The contact on the face from the Ds also helps the horse bring the opposite side of his face through a turn. This is a great bit to ride your colts in.
Although you should always check with show management, this snaffle with mouthpiece #9 is legal in AQHA & NRCHA snaffle bit classes.
-
Sale!

7″ Aluminum Shanked Bit #B9
$100.00 – $228.00Price range: $100.00 through $228.00Description: The 7″ shanks on this bit are made of aluminum which makes it lighter weight than a steel bit. It’s designed so the junction at the mouthpiece and shanks will never pinch a horse. This bit is available with your choice of 4 mouthpieces, all 5 1/8 inches wide (see picture). The #0 mouthpiece is made of soft rubber. All others are made of steel with inlaid copper strips to promote salivation. The #1 Correction mouthpiece and the #1W Solid Port mouthpiece are 3/8 inch in diameter, the #2B Medium Port mouthpiece is 7/16 inch in diameter.
This bit comes with the #51 3/8 inch Latigo Leather Bit Hobble with hand braided rawhide keepers, shown here.
How it works: The 7″ Aluminum Shank Bit is milder than a steel bit because of its light weight and works well to introduce your colt to a shanked bit from a snaffle or hackamore. This bit allows a soft touch to pull a colt around to teach him to turn and maneuver in a shanked bit. It also works well on many older, finished horses and helps keep them relaxed and light in the face.
Shown with mouthpiece #2B.

