Cowboy Split Ear Headstall #HS11
$85.00
Description: The Cowboy Split Ear Headstall is made of single ply 5/8 inch heavy harness leather. The buckle is beveled stainless steel with a leather loop keeper. The leather beneath the buckle is hand sewn together to prevent the buckle from slipping. The headstall has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The Cowboy Split Ear is designed with teardrop bit ends.
How it works: This headstall has an extra-long ear split which allows it to nicely fit all horses, big and small. This headstall really fits a horse. This is my favorite single ply headstall and continues to be one of my best sellers. I designed the pattern for this when I started my business in 1976 and in those days I used to trace it on the leather by using a wooden pattern I had carved! The design has not changed (but my pattern isn’t wooden anymore)!
Available with your choice of tie end, slot concho or concho bit ends (see dropdown). Slot conchos are the safest way to attach a headstall to a bit, I highly recommend the slot concho. They’re punchy and they look great. Dennis
Shown with slot conchos.
Related products
-
3/4″ Two Buckle Slide Ear Headstall #HS23
$118.00Description: The 3/4 Inch Two Buckle Slide Ear Headstall #HS23 is made of single ply heavy harness leather that is 3/4 inch wide and is designed with teardrop bit ends The sliding ear piece on this headstall is doubled and stitched. The leather is hand-edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles are beveled stainless steel. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. They’re always right where you need them when you adjust the size of the headstall for another horse.
This headstall is available in 3 sizes (see dropdown). The small horse size has a 28 inch crown and is designed to fit horses under 14 1/2 hands. The average horse size has a 33 inch crown to fit horses approximately 14 1/2 to 15 1/2 hands. The large horse size comes with a 36 inch crown and is designed to fit horses over 15 1/2 hands.
Like the#HS13 5/8 Inch Two Buckle Slide Ear this is a great headstall for any discipline with a shank bit. It comes with your choice of slot conchos, conchos or tie string bit ends (see dropdown).
Shown with slot conchos.
-
Snap and Buckle for Breast Collars and Martingales #ZE
$30.00Description: This replacement strap fits all breast collars and leather martingales. It’s made of doubled and stitched 3/4 inch harness leather with a beveled stainless steel buckle and snap. The leather is sewn together beneath the buckle to prevent the buckle from slipping down the strap. This strap has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again to give it a very nice finish.
-
Shaped Breast Collar #BC2
$241.00Description: This Shaped Breast Collar is made of harness leather. The body pieces are lined with burgundy latigo leather. They taper from 1 3/4 inches at center, to 1 1/4 inches at the Dees. This taper gives it its great-fitting shape. The leather below the center dee is lined with sheepskin. Each tug is made of 3/4 inch single ply leather and has 8 adjustment holes. The hold down strap is doubled and stitched 3/4 inch harness leather with an easily adjustable snap and buckle. The leather is hand edged and rubbed, treated with Neatsfoot Oil, and hand-rubbed again. The ring, dees, roller buckles and snap are all stainless steel.
How it works: This is my favorite breast collar. Firstly, it adjusts to fit almost any sized horse. For instance, it will fit a 2 year old colt as well as it fits a 16+ hand ranch horse. Secondly, the body pieces on this breast collar are shorter than other breast collars on the market. This allows you to use the tugs for adjustment, like they should be used. In addition, the shaped form fits a horse beautifully.
This breast collar is available in your choice of smooth or roughout leather (see dropdown).
Shown is Boyd Rice celebrating a win on Third Cutting in a #BC2 Shaped Breast Collar. Also shown is the 8″ Aluminum Shank Bit #B8 and the XXX Harness Leather Split Reins #ASR2. Alan Gold photo.
-
Doubled and Stitched Two Buckle Headstall #HS33
$119.99Description: The Doubled and Stitched Two Buckle Slide Ear Headstall #HS33 is made of 5/8 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. This headstall is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The beveled buckles are stainless steel. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. The crown piece on this headstall comes in 2 sizes: 36 inches in length for those horses 15 hands and under and 40 inches for those over 15 hands (see dropdown for choices).
How it works: The buckle pieces on this headstall are extra short to keep the buckles away from the horse’s eyes. This doubled & stitched headstall is not thicker than a single ply leather headstall and has that good feel in your hands and on the horse.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thicknesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance.
The headstall has teardrop bit ends with your choice of slot conchos, tie ends, or conchos (see dropdown).
Shown with slot conchos.
-
Easy Stop #ES1
$229.00Description: The Easy Stop #ES1 is a very good piece of tack to use when you want to teach your horse to stop correctly when cued, without having to put pressure on the mouth. Often a horse will show a lot of improvement in it’s stop with just a few rides in the Easy Stop.
The noseband is made of 3/8 inch nylon rope that is specially designed to lay right from the first ride. The headstall is made of 3/4 inch dense, tight-fibered harness leather. The leather has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel and the leather beneath the buckles is hand stitched together to prevent the buckles from sliding down as you’re adjusting the headstall. This Easy Stop includes a hand-tied tan 1/4 inch nylon fiador tied to the top of the spoon so it won’t interfere with the reins.
Choice of Reins: Almost any of the reins we make will work well. If you don’t see what you need here, please see the rein category These reins can be purchased separately.
How it works: The Easy Stop noseband will apply pressure on the nose just like a hackamore or bosal. Additionally, the stainless steel Easy Stop spoon will come forward as the reins are pulled and make contact with the horse’s chin, in the space between the 2 jawbones (the intermandibular space). I carefully designed the angle of the Easy Stop spoon to function correctly and lay close enough to the horse’s intermandibular space that it doesn’t apply pressure until the reins are pulled. The edges of the spoon are smooth and have a gentle bevel so there’s nothing sharp touching your horse. This Easy Stop is designed so the spoon doesn’t flip over when there’s not any pressure on the reins.
This is used by top professional cutting, cow horse, reining and barrel horse trainers, among others, and will last through years of use. This is a real good tool to have in your tack room for those times when a horse is not responding as soon as he is being asked to stop. Your horse should be broke to give at the poll and should be flexible both laterally and longitudinally before being ridden with an easy stop.
Shown on the horse with the Easy Stop are a pair of XX Harness Leather Split Reins #ASR3.
If you are unfamiliar with the use of an Easy Stop, seek professional help before using it on your horse.
