5/8″ Nylon Lead Rope with Snap #ALR4
$35.00
Description: This 5/8″ Nylon Lead Rope with Snap #ALR4 is made of white medium lay 5/8″ nylon rope with a stainless steel bull snap that’s hand braided/spliced in. The tail is braided back to prevent unraveling. The length is 10 feet before braiding, making it approximately 9 ft. 4 in. when it’s finished. The 5/8 inch nylon makes a good, stout, lead rope with plenty of flexibility to tie easily. You can read how to properly tie a lead rope by clicking: Take Me To Your Lead Rope.
Related products
-

No Buckle Hobble with Chain Center #H3C
$105.00Description: This No Buckle Hobble with Chain Center #H3C has an easy “on/off latch” that makes it a snap to take on and off your horse’s fetlocks. It is 1 3/4 inches wide and made of doubled and stitched latigo leather. The smooth stainless steel chain link in the center makes it more flexible than similar hobbles with leather centers such as the #H3L No Buckle Hobble. This should only be used on horses that are completely hobble broke.
Visit “Hobble Along” to read my Tack Talk article on proper and safe use hobbles.
For use only on horses that are hobble broke.
-

Leather Tiedown Strap #ZG
$67.00 – $72.00Price range: $67.00 through $72.00Description: Our Leather Tiedown Strap #ZG comes in both 3/4 inch and 1 inch widths (see dropdown). Both sizes are fully adjustable and made of single ply harness leather that has been edged, hand rubbed, treated with Neatsfoot Oil and hand rubbed again. Snaps and roller buckle are stainless steel. These are top of the line tiedown straps that you will be able to use for many years of hard daily work without problems.
-

German Martingale Complete #CM1A
$527.00How it works: The key to any German Martingale is the release of pressure on the bit. The Y-cord on my German Martingale is made with a very tightly braided cord with a hard finish. This cord runs from the cinch, through the rings of the bit and connects to the reins at the Y cord rein knot (please see diagram). This cord releases immediately, with no drag, when you release finger-tip pressure on the reins. The horse learns to respond to pressure on the bit from this quick and rewarding release.
The neck strap on my German Martingale is long to give the correct angle from the cinch to the bit. This angle is very important in the training process because it encourages a horse to lower its neck from the withers before flexing at the poll. You will not find this angle on other German Martingales. The safety hobble on the neck strap goes through the gullet and over the horn to prevent the neck strap from sliding forward and getting caught behind the ears. Without the safety hobble pressure from the martingale sliding forward may cause a horse to rear up and possibly fall over backwards.
There is only one simple adjustment on my German Martingale; the adjustment knot that leads to the cinch snap. This can be adjusted so this Martingale fits any size horse correctly. This is a great tool to use on any age horse. It helps relax and collect a horse and helps eliminate dropped shoulders in preparation for advanced maneuvers.
A German Martingale needs to be used correctly and with caution. Always check a horse from the ground so they know the German Martingale is there before you get on. Do not let the horse drop its head to the ground because he can step through the martingale rein and cause an accident. When you dismount, immediately unsnap the martingale from the cinch.
Description: The complete German Martingale includes the #HS24 3/4″ Browband Headstall, your choice of the #17-9 Heavy Ring Snaffle with 3/8th inch 2 piece mouthpiece, the #17-42 Heavy Ring Snaffle with 3/16th inch twisted wire mouthpiece or the #18 Egg Butt Snaffle and your choice of 3 harness leather reins. The choice of reins includes: the #ASR6 DM Harness Leather Split Reins which are 6 1/2 to 7 feet and work well on the smaller horse, the #ASR3 XX Harness Leather Split Reins which are 7 to 7 1/2 feet and are a good length for the average horse of 14.2 to 16 hands, and the #ASR2 XXX Harness Leather Split Reins are 7 1/2 to 8 feet and work well on horses 16 hands and over.
Also shown on the horse is the #CA1 3/16th” Rope Cavesson with Rawhide Braided Nose. This cavesson is sold separately and not included in the price of the German Martingale.
Assistance from a professional is necessary to learn safe use of a German Martingale. If you’re not familiar with the proper use of a German Martingale, get the help of a professional trainer who is experienced with its use.
-

Bronc Sideline #SL1
$97.00Description: The cuffs on this Bronc Sideline #SL1 are made of 1 3/4 inch doubled and stitched burgundy latigo leather with a leather tab fastener for easy connection and release. The rectangle and Dee are made of smooth round stainless steel rod. The cuffs are connected with 1/2 inch by 24 inch nylon rope. This’ll be one of the handiest tools you’ll ever use.
How it works: To apply the Bronc Sideline just build a loop in the back of the cuff by sliding the rope through, let the colt step in it and pull it snug. Let him settle and then attach the easy-on front cuff. Always use caution when putting the sideline on for the first time. Get out in an open sandy arena with lots of room so your colts or horses will be safe if they react to having their legs connected with the sideline. Once horses learn how a sideline feels they usually accept it and stand quietly. Both sidelines and hobbles can have a very quieting effect on the horse’s mind.
The first time you use the sideline on your horse or while training the horse to accept it use a wide open sandy area. Do not put it on in a confined space until they accept the sideline easily and well. If you are not familiar with the use of sidelines seek help from a professional who is experienced with their use.
-

Adjustable Latigo Leather Cavesson #CA5
$80.00 – $86.25Price range: $80.00 through $86.25Description: This Adjustable Latigo Leather Cavesson #CA5 is made with a doubled and stitched 5/8 inch burgundy latigo leather noseband. The chin strap and headstall are single ply burgundy latigo leather. This latigo is a soft, pliable leather that feels good on a horse’s face. It’s stout and will last for years of hard use. The buckles and rings are stainless steel. This cavesson is available in small and large sizes. Both sizes are adjustable. The noseband on the small cavesson adjusts between 20 1/2 and 24 inches and the crown adjusts between 30 and 33 inches. The noseband on the large cavesson adjusts between 23 and 27 inches and the crown adjusts between 31 and 38 inches. Generally speaking, the small size will fit the smaller or young horse (approximately 14.2 hands and under) and the large size will fit the mature/bigger horse over 14.2 hands.
Size Measurement: An easy way to be certain to get the correct sized cavesson is to wrap a leadrope around the nose where the cavesson will lay, mark the leadrope with a magic marker, straighten it and then measure the leadrope. When measuring, be sure to wrap the leadrope loosely enough that the horse will have enough room between his nose and the cavesson to be comfortable and to be able to hold the bit. A good rule of thumb is 2 fingers width between the nose and cavesson (which is the diameter of most leadropes) if the horse is trained to a cavesson.
This cavesson is a good starting cavesson and is also good for sensitive horses. It should be adjusted loosely when starting any horse in it.
For more information on cavesson fit and use visit: There’s More to a Cavesson than Meets the Eye: How and Why to Use Cavessons

