Barely Legal Mullen Small O-Ring Snaffle
$200.00
Description: Handmade mullen small O-ring snaffle with a 5/16″ beveled mouthpiece. The fine mouthpiece gives a light and quick signal. Built by hand in Texas.
AQHA, NRCHA and NRHA legal.
Related products
-
Single Buckle Leather Curb Strap #CU31
$30.00Description: The Single Buckle Leather Curb Strap #CU31 is made of 5/8 inch hand-edged harness leather that has been hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The buckle is stainless steel and the leather under the buckle is hand stitched together to prevent the buckle from slipping out of position.
How it works: This is designed for use on a Ring, Offset D or Eggbutt Snaffle Bit. This nice functional curb is built of high quality materials that will hold up through years of hard use. It will not stretch or get limber with use and is easy to adjust.
Visit my Tack Talk article “Curb Your Enthusiasm” to learn more about curbs.
-
Sale!
Steel Argentine Bit with Silver #A1
Original price was: $392.00.$292.00Current price is: $292.00.Description: The Steel Argentine Bit #A1 has 6 1/4 inch shanks. It’s made of high grade 4130 steel and overlaid with beautiful hand engraved nickel silver. Five steel mouthpieces are available (see picture). All are 5 1/8 inches wide and have inlaid copper strips to promote salivation except #42. Mouthpiece diameters are listed in the picture and dropdown.
Purpose: This is a nice mild shank and a good one to continue training with once your horse has advanced from the snaffle. It can often be used when a horse is having trouble or is resistant in a longer shanked bit and needs to come back to a milder bit with slower action for a time. This bit works well on many horses and is a great choice if you want one handy all-around bit in the tack room.
This bit comes with #BH51 Latigo Leather Bit Hobble with hand braided rawhide keepers. Shown here with #BH41 Latigo Bit Hobble.
Shown with mouthpiece #2B.
-
Ring Snaffle Bit #17
Price range: $50.00 through $150.00Description: The Ring Snaffle Bit #17 is made of 5/16th inch steel. The rings are 2 3/4 inches in diameter. This snaffle is available with 4 mouthpieces (see picture). All mouthpieces are 5 1/8th inches wide. Mouthpiece #9 has inlaid copper bars to promote salivation.
Snaffle Bit Mouthpiece choices:
#0: This soft rubber mouthpiece is 11/16″ in diameter. This mouthpiece is designed for very sensitive horses. It is soft on the tongue and bars and can be an excellent first mouthpiece for colts.
#9: This steel 2 piece snaffle mouthpiece is 3/8” in diameter. This is a great tool for anyone who wants a quicker and more consistent response when a horse is asked to give his head. Champion trainers including Tarin Rice, Boyd Rice, Gerald Alexander, Robbie Boyce, Matt Koch, Brad Lund, & Bozo Rogers all use and really like the results they get with this snaffle. Some of their comments are: “more feel than any snaffle I’ve ever put in a horse’s mouth”, “best snaffle I’ve ever ridden”, “this snaffle works so well!”, “my colts are going to the futurity in this snaffle”.
#42: The 3/16th inch steel twisted wire is designed for the horse that has become resistant to the plain snaffle and needs a bit of extra signal on the corners of the mouth to respond correctly. This steel bit is especially built at this diameter to prevent it from pinching or grabbing the skin at the sides of the mouth.
#48: The 1/8 inch stainless twisted wire mouthpiece is specifically designed so it will not pull or pinch the corners of the horses mouth like a steel mouthpiece of the same size will. This small diameter combined with the twisted wire will help a horse that is resistant to a pull to respond quickly and correctly.
Although you should always check with show management, this snaffle with mouthpiece #9 is legal in AQHA & NRCHA snaffle bit classes. Shown is mouthpiece #9.
-
Sliding Gag Bit with Twisted Wire Snaffle #20-42
Price range: $200.00 through $253.00Description: This Dennis Moreland Tack Sliding Gag Bit with Twisted Wire Snaffle #20-42 is built with a center bar on the bit cheeks which limits the movement of the sliding mouthpiece to provide quicker action and instant relief. The hard lay nylon cord allows the bit to slide easily. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. The twisted wire mouthpiece gives a stronger signal than the common snaffle and is very good to use if your horse has become resistant to giving his nose and/or lowering his head. This snaffle should improve stops in a horse that is trying to run off. This Sliding Gag comes with your choice of a stainless steel twisted wire headstall or, for the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch browband headstall (see photo).
How it works: The simultaneous pressure on the mouth from the sliding gag bit and on the poll from the twisted, shaped, stainless steel or the leather crown increases control of the nose and improves total balancing power to produce the ultimate in vertical flexion and feel. Because your rein aids are strengthened with the gag, your leg cues given at the same time become reinforced and easier for the horse to respond to. You will be able to better concentrate on fine details of your training rather than large rebalancing or repositioning efforts regardless of your type of riding. This gag bridle is an excellent training tool for both young and older horses that need to improve flexibility and response. Your horse will learn that when it breaks at the poll the release will be instant, smooth, and consistent. Since these gags release so quickly your horse is not trapped in position while it waits for the release to occur. This helps horses stay calm and confident in training and also when they are in competition. The leather crown works well with this twisted wire mouthpiece on horses that want to drop their heads while continuing to pull on the bit.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
If you don’t have experience with sliding gags Dennis Moreland Tack recommends you seek the help of a professional who has experience as you are learning to use them.
-
Sale!
7″ Aluminum Shanked Bit #B9
Price range: $100.00 through $228.00Description: The 7″ shanks on this bit are made of aluminum which makes it lighter weight than a steel bit. It’s designed so the junction at the mouthpiece and shanks will never pinch a horse. This bit is available with your choice of 4 mouthpieces, all 5 1/8 inches wide (see picture). The #0 mouthpiece is made of soft rubber. All others are made of steel with inlaid copper strips to promote salivation. The #1 Correction mouthpiece and the #1W Solid Port mouthpiece are 3/8 inch in diameter, the #2B Medium Port mouthpiece is 7/16 inch in diameter.
This bit comes with the #51 3/8 inch Latigo Leather Bit Hobble with hand braided rawhide keepers, shown here.
How it works: The 7″ Aluminum Shank Bit is milder than a steel bit because of its light weight and works well to introduce your colt to a shanked bit from a snaffle or hackamore. This bit allows a soft touch to pull a colt around to teach him to turn and maneuver in a shanked bit. It also works well on many older, finished horses and helps keep them relaxed and light in the face.
Shown with mouthpiece #2B.
