5/8″ Two Buckle Slide Ear Headstall #HS13
$118.00
Description: The 5/8 Inch Two Buckle Slide Ear Headstall #HS13 is made of single ply heavy harness leather that is 5/8 inch wide and is designed with teardrop bit ends The sliding ear piece on this headstall is doubled and stitched. The leather is hand-edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles are beveled stainless steel. The leather beneath the buckles is hand stitched to prevent the buckles from slipping. There’s never any reason to slide the buckles up and down the cheek pieces when you need to adjust the size for the next horse, they always stay right in place.
This is a nice headstall for any discipline using any shanked bit. It comes with your choice of slot conchos, conchos or tie string bit ends (see dropdown).
Shown with slot conchos.
Shown is Buster Welch riding Austin Shepard’s horse Bet Hesa Cat in this headstall during the Neiman Marcus NCHA Futurity Champions Cup. Photo courtesy of Sally Harrison.
Related products
-
Doubled and Stitched One Buckle Headstall #HS32
$114.99Description: The Doubled and Stitched One Buckle Slide Ear Headstall #HS32 is made of 5/8 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. This headstall is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The beveled buckle is stainless steel. The leather beneath the buckle is hand sewn together to prevent the buckle from slipping.
How it works: The buckle piece on this headstall is extra short to keep the buckle away from the horse’s eye. This doubled & stitched headstall is not thicker than a single ply leather headstall so has that good feel in your hands and on the horse’s face.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thicknesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance.
The Doubled and Stitched One Buckle Slide Ear Headstall has teardrop bit ends with your choice of slot conchos, tie ends, or conchos (see dropdown).
Shown with slot conchos.
-
3/4″ Split Ear Headstall #HS12
$85.00Description: The 3/4 Inch Split Ear Headstall is made of single ply 3/4 inch heavy harness leather. This headstall has an extra-long ear split so it easily adjusts to fit any size horse, big and small. As a matter of fact it fits bigger horses better than any of my other headstalls. The buckle is beveled stainless steel with a leather loop keeper. The leather beneath the buckle is hand sewn together to prevent the buckle from slipping. The headstall has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The 3/4 Inch Split Ear is designed with teardrop bit ends.
Available with your choice of tie end, slot concho or concho bit ends (see dropdown). Slot conchos are the safest way to attach a headstall to a bit, I highly recommend the slot concho. Dennis
Shown with slot conchos.
-
Basket Stamped Two Buckle Slide Ear Headstall #HS42
$148.00Description: The Basket Stamped Two Buckle Slide Ear Headstall is made of 5/8 inch double and stitched skirting leather. It has a precisely designed slide ear piece that will fit comfortably on any age or size horse. There are two beveled stainless steel adjustment buckles with hand braided rawhide loop keepers. The extra hand stitching just below the buckles prevent them from slipping. Doubled and stitched leather is more durable and longer lasting than single ply leather. The doubled & stitched headstalls are not thicker than single ply so still have that good feel in your hands and on the horse.
Crafting: To make a doubled and stitched basket stamped headstall I take 2 pieces of skirting leather and split them to the correct thicknesses. Next I glue the 2 pieces together and carefully cut the desired shapes. Finally it’s stitched together and stamped.
Doubled and stitched leather is more durable and longer lasting than single ply leather. The doubled & stitched items are not thicker than single ply leather so still have that good feel in your hands and on the horse.
Comes with slot conchos.
-
Sliding Gag Bit with Twisted Wire Snaffle #20-42
Price range: $200.00 through $253.00Description: This Dennis Moreland Tack Sliding Gag Bit with Twisted Wire Snaffle #20-42 is built with a center bar on the bit cheeks which limits the movement of the sliding mouthpiece to provide quicker action and instant relief. The hard lay nylon cord allows the bit to slide easily. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. The twisted wire mouthpiece gives a stronger signal than the common snaffle and is very good to use if your horse has become resistant to giving his nose and/or lowering his head. This snaffle should improve stops in a horse that is trying to run off. This Sliding Gag comes with your choice of a stainless steel twisted wire headstall or, for the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch browband headstall (see photo).
How it works: The simultaneous pressure on the mouth from the sliding gag bit and on the poll from the twisted, shaped, stainless steel or the leather crown increases control of the nose and improves total balancing power to produce the ultimate in vertical flexion and feel. Because your rein aids are strengthened with the gag, your leg cues given at the same time become reinforced and easier for the horse to respond to. You will be able to better concentrate on fine details of your training rather than large rebalancing or repositioning efforts regardless of your type of riding. This gag bridle is an excellent training tool for both young and older horses that need to improve flexibility and response. Your horse will learn that when it breaks at the poll the release will be instant, smooth, and consistent. Since these gags release so quickly your horse is not trapped in position while it waits for the release to occur. This helps horses stay calm and confident in training and also when they are in competition. The leather crown works well with this twisted wire mouthpiece on horses that want to drop their heads while continuing to pull on the bit.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
If you don’t have experience with sliding gags Dennis Moreland Tack recommends you seek the help of a professional who has experience as you are learning to use them.
-
3/4″ Short Cheek Browband Headstall #HS25
$145.00Description: The 3/4 Inch Short Cheek Browband Headstall #HS25 is made of heavy single ply harness leather, 3/4 inches wide. The leather has been hand-edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The browband is doubled and stitched. The throatlatch is made of 5/8 inch single ply leather. All the buckles are beveled stainless steel with leather loop keepers. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping which helps make this headstall so nice to adjust to fit different horses. This is a very durable headstall that will last through years of hard use. This is the perfect headstall to ride with any bit and it’s nice enough to go anywhere and look good.
How it works: The cheek pieces on this headstall are shorter than average and shorter than the similar #HS24 headstall. The shorter cheeks assure that the buckle pieces will not get close to the horse’s eyes. This is especially nice on the horse with a small head but works well on any size horse. This headstall is available in 2 sizes (see dropdown). The small horse size has a 33″ crown to fit horses 15 hands and under and the large horse comes with a 36″ crown and is designed to fit horses over 15 hands.
Available with your choice of slot concho, concho or tie string bit ends (see dropdown).
Shown with slot conchos.
