Adjustable Barrel Rein #RR25
$125.00
Description: This Adjustable Barrel Rein #RR25 is made of very high quality Hermann Oak harness leather. It’s 5/8 inches wide. The snaps, loops and beveled adjustment buckles are stainless steel. The leather is hand sewn together right under the buckles. This keeps the buckles from slipping during adjustments.
This rein has 7 adjustment holes on each side. The holes are 2 inches (5.1 cm) apart. The rein can be adjusted between 5 ft. 10 inches (178 cm) and 7 ft. (213 cm).
This top quality leather allows the rein signals you give your horse to travel to the bit consistently. Give this rein a try, it will be the best barrel rein you’ve ever felt, we guarantee it!
Related products
-
Rein Stops #ZA
$10.00Description: The Rein Stops are made of harness leather and measure 2 inches in diameter. They will fit any of the leather reins made at Dennis Moreland Tack. Reins Stops are made to go on the bit end of your reins and should be put on at the bit end.
How they work: Use these Reins Stops to prevent the rings on a martingale from getting hung up on the ends of your bit or on the bridle rein ends. This is a very good safety tool for very little investment. Sold by the pair.
-
Romal Reins Connecting Straps #ZO
Price range: $70.00 through $87.00Description: Our handmade Romal Reins Connecting Straps #ZO are made of latigo leather with rawhide loop keepers. They are 1/2 inch wide and have 5 adjustment holes (with room for more) to allow you to change the length between 4 1/2 and 6 inches. The roller buckles are stainless steel. The leather beneath each buckle is hand stitched together to prevent the buckle from slipping down the strap during adjustments. The hand braided rawhide loop keepers make these quality straps even more beautiful. They add a nice accent to rawhide, kangaroo or leather romal reins!
How they work: These straps will safely connect your romal reins to your bit. The stainless steel roller buckles allow easy and quick adjustments in length. These straps will work with or without snaps. Three inch stainless steel bolt snaps (shown in photos of horses) are available in the dropdown for an extra $17.00. If you order snaps we’ll put them on the straps before we ship them.
-
Performance Rein with Training Fork #CM6
Price range: $101.00 through $107.00Description: The Performance Rein is made of 5/8-inch solid braid nylon rope in your choice of 7 foot and 9 foot lengths. The exceptional quality of this rope makes it so easy to quickly adjust this rein in your hands. The 7 foot length is built to ride smaller cow and reining bred colts in. The 9-foot length is great for any horse. For safety the rein comes with leather rein stops on each end to prevent the rings of the training fork from becoming hooked on either the rein ends or the shanks of your bit. There are 3/4-inch leather rein ends (water loops) securely attached to both ends of this continuous rein.
The adjustable training fork is made of tan 1/4-inch solid braid nylon rope with two 1 1/2-inch stainless steel rings tied to the ends for the rein to run through. A stainless-steel snap attaches it to the cinch.
How it works: The continuous rein lets you train with close contact to the bit and with either one or both hands on the rein. The training fork will apply pressure to the rein and bit anytime the horse’s head rises above the desired headset position. You simply adjust the length of the cord that connects to the cinch to place the training fork rings in the correct position for each horse you’re riding.
Do not let the horse drop its head to the ground because it can step on the rein or training fork and cause an accident. When you dismount, immediately unsnap the training fork from the cinch.
This Performance Rein is available in Brown and Tri-color (see pictures at left). Select the color you prefer in the dropdown.
Also shown on the horse is the 3/4 Inch Short Cheek Browband Headstall #HS25, the Offset D Ring Snaffle Bit #19 and the Single Buckle Leather Curb Strap #CU31.
-
Round 3/8″ Nylon Mecate #DMR3
$108.00Description: This is a nice mecate to use on your 2 rein bosalita, your snaffle, or to use at home on any hackamore. This Round 3/8″ Nylon Mecate #DMR3, also called a McCarty, is 22 feet long and is made of round 3/8-inch nylon rope. It has a nylon tassel on one end and a latigo popper on the other end. Because of the narrow diameter this is a good rein for smaller hands. The mecate is only available in brown. The tan mecate shown in the picture on the horse is currently unavailable.
-
5/8″ Latigo on Latigo Reins, Medium Weight #BLL1
$149.00Description: Dennis cuts these doubled and stitched reins 5/8” wide. He makes them in two lengths: 7′ for horses under 14.2 hands and 7’9” for horses over 14.2 (see dropdown for choices). These Latigo on Latigo 5/8″ medium weight reins have very good feel and body.
To make these reins Dennis sews 2 pieces of latigo leather together with small, tight stitches. This makes the reins 9/32nd of an inch thick. All of the work is done by hand. He edges these reins by hand, rubs them, oils them and rubs them again.
How they work: This is Dennis’ 50th year making cowboy tack and he knows which leather makes the best reins. He personally chooses each hide he uses to make sure you’ll have good even contact and communication with your horse. There are no gray signals with these reins.
These are our best selling doubled and stitched reins and are a favorite in the show ring. They will hold their flexibility and shape even in cold weather and they are built to last.
Try a pair; it will be the best pair of doubled and stitched reins you have owned, we guarantee it.
