Performance Rein #RR30
Price range: $54.00 through $60.00
Description: This continuous Performance Rein #RR30 is made of 5/8 inch solid braid nylon rope. It’s available in 7 foot and 9 foot lengths. The exceptional quality of this rope makes it so easy to take your horse up or give him some slack. The 7 foot length is built to ride on smaller cow and reining bred colts. The 9 foot length is great for any horse.
This rein has harness leather rein ends (water loops) so you can securely attach the rein to your bit. It feels especially good in your hands and is excellent if you’re on a budget. Choose brown or tri-color (shown on horse) in the dropdown.
How it works: This continuous rein lets you rope, run barrels or train with close contact to the bit. Use one or both hands without ever worrying about losing a rein. Excellent for pleasure riding, too! Legal in AQHA, and most other association’s, speed events.
This rein is also available with a training fork and rein stops. To view click: Performance Rein with Training Fork #CM6.
Also shown on the horse is the 3/4 Inch Short Cheek Browband Headstall #HS25, the Offset D Ring Snaffle Bit #19 and the Single Buckle Leather Curb Strap #CU31.
Related products
-
Latigo on Latigo 1/2″ Reins, Medium Weight #BLL4
$145.00Description: If you’ve got smaller hands and are looking for a double and stitched rein with body and drape but not too much bulk these are a good pick. In your choice of 7 feet or 7 feet 9 inches long, these Medium Weight Latigo on Latigo 1/2 Inch Reins are our best selling double & stitched reins for ladies and youth with small hands. Because they are light, but drape so well when a horse is shown on a really loose rein, these are also a favorite with reiners. We make the 7’9″ length for average size horses. The 7′ length works for those who are training the smaller cutting & cow horse colts and for disciplines like ranch sorting where horses are shown gathered up through continuous quick turns. Choose the length you prefer in the dropdown.
These are made of medium weight leather that’s approximately 18 oz. making the reins 9/32nd of an inch thick after they’re stitched together. These reins are edged by hand, rubbed, oiled and rubbed again. This extra hand work adds to their great feel. Every detail we put in their production coupled with the fact we buy only the highest quality hides to make our reins gives you that good even contact with your horses face you’re looking for.
These reins are built to last.
-
Latigo on Latigo 5/8″ Reins, Heavy Weight #BLL2
$145.00Description: Dennis worked closely with the same tannery for years to find a thicker hide just for these double and stitched reins. Two pieces of heavy (total of 24 oz.) latigo are tightly stitched together to make this rein 3/8” thick. They’re cut 5/8” wide and 7′ long This length works well for training the smaller cutting & cow horse colts and for ranch sorters who keep their horses really gathered up through continuous quick turns.
These are a very heavy rein that allows for superb contact with a horse’s face. Dennis’ heavy weight latigo on latigo double & stitched reins are more pliable than the harness leather on latigo reins #BLH58 but they aren’t too heavy or stiff. If properly cared for, they will last for years. Like all of Dennis’ reins, they are hand edged and rubbed. The attention to detail and craftsmanship of these reins speaks for itself, we guarantee it.
These reins are shown on Nick Fury, ridden by Wade Meador. “These are the best feeling reins I’ve ever used” says Wade. ” They’ve got a lot of weight and they always give me real consistent communication with my horses. The signal response time with any pair of reins is critical and these are the best.” Wade Meador, 2020 NRCHA World’s Greatest Horseman Finalist.
-
Sliding Gag Bit with Snaffle Mouthpiece #20-9
Price range: $200.00 through $253.00Description: This Sliding Gag Bit with Snaffle Mouthpiece #20-9 comes with a 3/8 inch common snaffle and your choice of 3 headstalls. The Two Piece Snaffle works to give you a smooth, quick and more consistent response when you ask your horse to give its head. This custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on the cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
The stainless steel twisted wire headstall is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are available (see dropdown to select).
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The draw gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
You may also order the Gag Bit with a twisted wire mouthpiece: #20-42 Sliding Gag w/Twisted Wire Snaffle.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
-
XXXX Harness Leather Split Reins #ASR1
$145.00Description: If you like a long heavy harness leather rein, this is the best of the best: 8 + feet long and 5/8 inch wide. Perfect for work, pleasure riding or showing. We understand horses, and we know what it’s like to ride a tall one. Shorter reins just don’t cut it. That’s why Dennis developed the XXXX Rein. They are more than 8 feet long giving plenty of tail for riding taller horses.
Crafting: Heavy harness leather bridle reins are very special to us. Every effort is made to give you the best rein you have ever had. We work closely with the tannery to get only the finest dense, tight fibered leather available. We cut the reins in pairs, hand edge, hand rub, oil and hand rub them again for a great feel before they’re shipped to you. This tight fibered harness leather will take some time to break in but will last for years of hard use. Please feel free to call and we will “talk reins”.
-
8″ Aluminum Shanked Bit #B8
Price range: $199.00 through $228.00Description: The 8″ shanks on this bit are made of aluminum. They are lighter weight than a steel bit which makes this a milder bit than a steel bit. It’s designed so the junction at the mouthpiece and shanks will never pinch a horse.
This bit is available with your choice of 9 mouthpieces. All the mouthpieces are 5 1/8 inches wide (see picture). All except the #0 Mouthpiece are made of steel with inlaid copper strips to promote salivation. The #0 Mouthpiece is made of soft rubber. The #1 Correction Mouthpiece and the #1W Solid Port Mouthpiece are 3/8 inch in diameter, the remainder are 7/16 inch in diameter. Make your selection in the dropdown.
This bit comes with the #BH51 3/8 inch Latigo Leather Bit Hobble, shown here.
How it works: Bits with aluminum shanks are milder than steel bits because of their light weight. This bit offers the ultimate in feel and control when you need a light touch but want the quick signal the 8 inch shanks provide. This is a nice switch when a horse needs a softer signal than a steel bit and it helps promote relaxation in a tense horse. It’s also great to lope in before showing. Many horses can be ridden continuously in this bit.
Shown is the late Mr. Gary Gonsalves riding Reyzin The Cash in the 2016 NCHA Super Stakes Finals with this Aluminum Shank Bit, Curb Strap with Flat Chain #CU10 and XXX Harness Leather Split Reins #ASR2. Photo courtesy of Mark Michels.
Bit is shown with mouthpiece #4F.
