Rope Headsetter with Rawhide Nose #CST1
Description: This headsetter is made of 3/16 inch rope with a hand braided rawhide nose. All hardware is stainless steel. The headsetter price does not include a tie down strap but you may purchase a Leather Tiedown Strap #ZG, either 3/4 or 1 inch in width, or a Nylon Tie Down Strap #ZH with the headsetter (see dropdown).
How it works: Pressure is applied from the tiedown strap to the nose as the head goes up causing the cheek pieces to slide through the nose piece rings until they hit the top stops on the cheek pieces (the rawhide nose piece on this headsetter gives a stronger signal on the nose than the plain rope headsetter). As the cheek pieces are sliding pressure is increased at the poll. This headsetter applies more pressure to the poll than to the nose. The pressure points together cause the horse to lower his head to a natural position to find release. This is a very popular training tool with ropers and can help those horses that have a tendency to raise their heads while roping. It can be a great training aid for other disciplines also. Horses can learn to ride with their heads lower if ridden in the headsetter tiedown.
Related products
-
Chuck Frasier Sidepull #CP40
$271.00Description: The noseband on this sidepull is crafted from firm 3/8″ nylon rope, which is specially designed to ensure it lays correctly from the first ride. The headstall is made of single ply 3/4″ tight-fibered harness leather with a 5/8″ throat latch. This sidepull comes with slot conchos which are the safest and most secure conchos available. You can see the photos on the left for instructions on slot concho removal and application. The buckles on this Chuck Frasier Sidepull #CP40 are stainless steel with the leather below the buckles stitched to keep them in place.
How it works:
Since this sidepull is considered a bitless bridle, it is designed for use on the adult horse and is a great tool to avoid putting pressure on the horse’s mouth while maintaining plenty of control. With the design of this sidepull, the stainless-steel shanks come against the opposite side of the horse’s face with a direct rein pull so the horse starts his turns without leaning. Put your leg on him once the turn is started to teach him to complete the turn without leaning. The noseband in combination with the dog chain curb provides a strong signal to stop.Watch the video “The Secret to using the Chuck Frasier Sidepull” to learn more.
Shown with ASR3 XX Harness Leather Split Reins.
-
No Buckle Hobble with Chain Center #H3C
$102.00Description: This No Buckle Hobble with Chain Center #H3C has an easy “on/off latch” that makes it a snap to take on and off your horse’s fetlocks. It is 1 3/4 inches wide and made of doubled and stitched latigo leather. The smooth stainless steel chain link in the center makes it more flexible than similar hobbles with leather centers such as the #H3L No Buckle Hobble. This should only be used on horses that are completely hobble broke.
Visit “Hobble Along” to read my Tack Talk article on proper and safe use hobbles.
For use only on horses that are hobble broke.
-
Kick Chain #KC1
$67.00Description: The Kick Chain #KC1 is made of doubled and stitched 1 3/4 inch burgundy latigo. It has a leather cuff that fastens to a rectangle to secure it to the fetlock. The rectangle, dee and 12 inch chain are all smooth stainless steel. This kick chain is made to fit the front or back fetlock of any size horse.
How it works: This is an ideal aid for horses that want to kick or paw while in the stall or trailer, or paw while tied up. It can be fastened to either a front or hind fetlock. Most horses will stop pawing or kicking after a short time with the kick chain but a small percentage will need to wear it indefinitely. Generally, one kick chain can be used for a session and then transferred to the other front or back fetlock for a session and the problem will be solved. Occasionally a horse that has been pawing or kicking for a long time will need to wear a kick chain on both legs at the same time.
This is sold as a single kick chain. If you need more than 1 please order additional kick chains in the ”quantity” box.
This is not a tool to be used for teaching horses to not kick at people.
Shown on a horse that is 15.1 hands and 1100 pounds.
-
Sliding Gag Bit with Snaffle Mouthpiece #20-9
Price range: $200.00 through $253.00Description: This Sliding Gag Bit with Snaffle Mouthpiece #20-9 comes with a 3/8 inch common snaffle and your choice of 3 headstalls. The Two Piece Snaffle works to give you a smooth, quick and more consistent response when you ask your horse to give its head. This custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on the cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
The stainless steel twisted wire headstall is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are available (see dropdown to select).
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The draw gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
You may also order the Gag Bit with a twisted wire mouthpiece: #20-42 Sliding Gag w/Twisted Wire Snaffle.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
-
Leather Noseband/Tiedown #T8
Price range: $70.00 through $142.00Description: The Leather Noseband Tiedown is made of 1 inch harness leather and lined with burgundy latigo leather. The leather has been edged, hand rubbed, treated with Neatsfoot Oil and hand rubbed again. The buckle is stainless steel with a leather keeper. The leather beneath the buckle is stitched together to keep the buckle in place when you adjust it between horses. The ring is also stainless steel. Shown without a tiedown strap but is available with your choice of a #ZG 1 inch or a 3/4 inch Leather Tie Down Strap or #ZH Nylon Tie Down Strap (see dropdown to order).
How it works: This is the softest noseband I make and will work really well on a sensitive horse or one that wants to use the noseband for balance rather than pushing on it or leaning into it. A very well made noseband that will hold up to many years of hard use.
