Nylon Tiedown Strap #ZH
$33.00
Description: This is a high quality and at the same time economical tiedown strap made of 1/4 inch solid braid nylon cord. The cord loops through the ring in the tiedown and is adjustable. The swivel snap is stainless steel. This Nylon Tiedown Strap #ZH is very durable and let’s you stay on budget while getting a quality piece of gear!
Related products
-
String Cavesson w/ Rawhide Knots #CA3
$69.00Description: The String Cavesson with Rawhide Knots #CA3 has a noseband made of tan 1/8 inch solid braid nylon cord. The adjustment knots at the bottom of the noseband are covered with handbraided rawhide pineapple knots. These knots allow the noseband to be quickly and easily adjusted to 19, 21 and 23 inches. This is nice if you have a number of horses to ride. The headstall is made of 1/2 inch burgundy latigo leather that has been edged and hand-rubbed. The buckle is beveled stainless steel with a leather loop keeper. The headstall leather under the buckle is hand sewn together to prevent the buckle from slipping when the headstall is adjusted. This cavesson lays so flat under your bridle you won’t know it is there!
Size Measurement: An easy way to be certain this cavesson will fit is to wrap a leadrope around the nose where the cavesson will lay, mark the leadrope with a magic marker, straighten it and then measure the leadrope. When measuring, be sure to wrap the leadrope loosely enough that the horse will have enough room between his nose and the cavesson to be comfortable and to be able to hold the bit. A good rule of thumb is 2 fingers width between the nose and cavesson (which is the diameter of most leadropes) if the horse is trained to a cavesson. This will fit any nose between approximately 19 and 23 inches.
This cavesson is a good all-around cavesson and can be used on colts if adjusted loosely when starting them in it.
For more information on cavesson fit and use visit: There’s More to a Cavesson than Meets the Eye: How and Why to Use Cavessons
-
Adjustable Running Martingale #CM2
$155.00Description: The fully Adjustable Running Martingale #CM2 is made of single ply 3/4 inch harness leather with a neck and safety hobble strap. Neck strap, cinch strap, and ends on ring straps are all adjustable to fit horses of all sizes. The safety hobble strap runs through the gullet of the saddle and over the horn to prevent the neckstrap from sliding to the ears. The buckles, rings and snaps are stainless steel. Leather beneath the buckles and rings has been hand sewn together to prevent slipping or turning. A favorite with professional horsemen everywhere.
How it works: The martingale is a very useful tool to aid a horse in learning proper head position as he learns collection. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
A good rule of thumb for adjustment is to allow horse to stand comfortably, attach snap to cinch D ring and extend ring straps until they reach 1 to 2 inches from the bottom of the jaw.
-
Slobber Straps #ZL
$33.00Description: Slobber Straps #ZL add extra weight to the bit end of your mecate. This weight causes a quicker release of the pressure on the mouth from the bit when the pull on the reins is released.
These slobber straps are made of 2 inch x 5 1/2 inch (folded) racetrack harness leather, the most durable leather available. They have been edged, hand rubbed, oiled with Neatsfoot Oil and hand rubbed again. These straps are sold in pairs.
Also shown is the Eggbutt Snaffle Bit #18 and the Round 5/8″ Nylon Mecate #DMR5.
-
Leather Noseband/Tiedown #T8
Price range: $70.00 through $142.00Description: The Leather Noseband Tiedown is made of 1 inch harness leather and lined with burgundy latigo leather. The leather has been edged, hand rubbed, treated with Neatsfoot Oil and hand rubbed again. The buckle is stainless steel with a leather keeper. The leather beneath the buckle is stitched together to keep the buckle in place when you adjust it between horses. The ring is also stainless steel. Shown without a tiedown strap but is available with your choice of a #ZG 1 inch or a 3/4 inch Leather Tie Down Strap or #ZH Nylon Tie Down Strap (see dropdown to order).
How it works: This is the softest noseband I make and will work really well on a sensitive horse or one that wants to use the noseband for balance rather than pushing on it or leaning into it. A very well made noseband that will hold up to many years of hard use.
-
Rein Stops #ZA
$10.00Description: The Rein Stops are made of harness leather and measure 2 inches in diameter. They will fit any of the leather reins made at Dennis Moreland Tack. Reins Stops are made to go on the bit end of your reins and should be put on at the bit end.
How they work: Use these Reins Stops to prevent the rings on a martingale from getting hung up on the ends of your bit or on the bridle rein ends. This is a very good safety tool for very little investment. Sold by the pair.
