Roper Breast Collar #BC3
$273.00
Description: The Roper Breast Collar #BC3 has a shaped rough-out harness leather body that tapers from 2 3/4 inches to 1 3/4 inches. The body is lined with burgundy latigo leather with a sheepskin lined chafe under the center dee. Tugs are 1 inch single ply leather. The adjustable hold down strap is doubled and stitched 3/4 inch harness leather with an easily adjustable buckle. Leather is edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. Ring, dees, buckles and snap are stainless steel. This heavy breast collar is stout and will last for years.
Related products
-
Sliding Gag Bit with Twisted Wire Snaffle #20-42
Price range: $200.00 through $253.00Description: This Dennis Moreland Tack Sliding Gag Bit with Twisted Wire Snaffle #20-42 is built with a center bar on the bit cheeks which limits the movement of the sliding mouthpiece to provide quicker action and instant relief. The hard lay nylon cord allows the bit to slide easily. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. The twisted wire mouthpiece gives a stronger signal than the common snaffle and is very good to use if your horse has become resistant to giving his nose and/or lowering his head. This snaffle should improve stops in a horse that is trying to run off. This Sliding Gag comes with your choice of a stainless steel twisted wire headstall or, for the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch browband headstall (see photo).
How it works: The simultaneous pressure on the mouth from the sliding gag bit and on the poll from the twisted, shaped, stainless steel or the leather crown increases control of the nose and improves total balancing power to produce the ultimate in vertical flexion and feel. Because your rein aids are strengthened with the gag, your leg cues given at the same time become reinforced and easier for the horse to respond to. You will be able to better concentrate on fine details of your training rather than large rebalancing or repositioning efforts regardless of your type of riding. This gag bridle is an excellent training tool for both young and older horses that need to improve flexibility and response. Your horse will learn that when it breaks at the poll the release will be instant, smooth, and consistent. Since these gags release so quickly your horse is not trapped in position while it waits for the release to occur. This helps horses stay calm and confident in training and also when they are in competition. The leather crown works well with this twisted wire mouthpiece on horses that want to drop their heads while continuing to pull on the bit.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
If you don’t have experience with sliding gags Dennis Moreland Tack recommends you seek the help of a professional who has experience as you are learning to use them.
-
Doubled and Stitched Browband Headstall #HS34
$140.99Description: The Doubled and Stitched Browband Headstall is made of 3/4 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. The headstall has beveled stainless steel adjustment buckles with leather keepers on each cheek. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. The throatlatch is 5/8 inch racetrack leather. The headstall has been edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The crown piece on this headstall comes in 2 sizes: 36 inches in length for those horses 16 hands and under and 40 inches for those over 16 hands (see dropdown for choices). This is a general size recommendation and works for most horses.
How it works: The short cheek pieces on this headstall keep the buckles away from the horse’s eyes. This doubled & stitched headstall is not thicker than a single ply leather headstall and will have that good feel in your hands and on the horse. A beautiful hard-working headstall made to fit a horse. The #BC1 Straight Breastcollar looks real good with this headstall and is a nice combination for the Versatility Ranch shows.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thickesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance.
Bit ends are tear drop shaped with your choice of slot conchos, conchos or tie ends (see dropdown).
Shown with slot conchos.
-
Shaped Breast Collar #BC2
$241.00Description: This Shaped Breast Collar is made of harness leather. The body pieces are lined with burgundy latigo leather. They taper from 1 3/4 inches at center, to 1 1/4 inches at the Dees. This taper gives it its great-fitting shape. The leather below the center dee is lined with sheepskin. Each tug is made of 3/4 inch single ply leather and has 8 adjustment holes. The hold down strap is doubled and stitched 3/4 inch harness leather with an easily adjustable snap and buckle. The leather is hand edged and rubbed, treated with Neatsfoot Oil, and hand-rubbed again. The ring, dees, roller buckles and snap are all stainless steel.
How it works: This is my favorite breast collar. Firstly, it adjusts to fit almost any sized horse. For instance, it will fit a 2 year old colt as well as it fits a 16+ hand ranch horse. Secondly, the body pieces on this breast collar are shorter than other breast collars on the market. This allows you to use the tugs for adjustment, like they should be used. In addition, the shaped form fits a horse beautifully.
This breast collar is available in your choice of smooth or roughout leather (see dropdown).
Shown is Boyd Rice celebrating a win on Third Cutting in a #BC2 Shaped Breast Collar. Also shown is the 8″ Aluminum Shank Bit #B8 and the XXX Harness Leather Split Reins #ASR2. Alan Gold photo.
-
Straight Breast Collar #BC1
$199.00Description: The Straight Breast Collar is made of 1 inch wide harness leather lined with burgundy latigo. I make this breastcollar with a sheepskin lined leather chafe under the ring. The adjustable hold down strap is 3/4 inch wide with a 3/4 inch snap and buckle piece to connect it to the cinch. The tug straps are 3/4 inch wide. The ring, dees, buckles and snap are all beveled stainless steel. The leather is hand edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. This breast collar is also available in 3/4 inch size for the “petite mare” (see dropdown). This is a top quality, very versatile, handmade breast collar you will be proud to own!
-
3/4″ Split Ear Headstall #HS12
$85.00Description: The 3/4 Inch Split Ear Headstall is made of single ply 3/4 inch heavy harness leather. This headstall has an extra-long ear split so it easily adjusts to fit any size horse, big and small. As a matter of fact it fits bigger horses better than any of my other headstalls. The buckle is beveled stainless steel with a leather loop keeper. The leather beneath the buckle is hand sewn together to prevent the buckle from slipping. The headstall has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The 3/4 Inch Split Ear is designed with teardrop bit ends.
Available with your choice of tie end, slot concho or concho bit ends (see dropdown). Slot conchos are the safest way to attach a headstall to a bit, I highly recommend the slot concho. Dennis
Shown with slot conchos.
