Sliding Gag Bit with Twisted Wire Snaffle #20-42
$200.00 – $253.00Price range: $200.00 through $253.00
Description: This Dennis Moreland Tack Sliding Gag Bit with Twisted Wire Snaffle #20-42 is built with a center bar on the bit cheeks which limits the movement of the sliding mouthpiece to provide quicker action and instant relief. The hard lay nylon cord allows the bit to slide easily. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. The twisted wire mouthpiece gives a stronger signal than the common snaffle and is very good to use if your horse has become resistant to giving his nose and/or lowering his head. This snaffle should improve stops in a horse that is trying to run off. This Sliding Gag comes with your choice of a stainless steel twisted wire headstall or, for the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch browband headstall (see photo).
How it works: The simultaneous pressure on the mouth from the sliding gag bit and on the poll from the twisted, shaped, stainless steel or the leather crown increases control of the nose and improves total balancing power to produce the ultimate in vertical flexion and feel. Because your rein aids are strengthened with the gag, your leg cues given at the same time become reinforced and easier for the horse to respond to. You will be able to better concentrate on fine details of your training rather than large rebalancing or repositioning efforts regardless of your type of riding. This gag bridle is an excellent training tool for both young and older horses that need to improve flexibility and response. Your horse will learn that when it breaks at the poll the release will be instant, smooth, and consistent. Since these gags release so quickly your horse is not trapped in position while it waits for the release to occur. This helps horses stay calm and confident in training and also when they are in competition. The leather crown works well with this twisted wire mouthpiece on horses that want to drop their heads while continuing to pull on the bit.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
If you don’t have experience with sliding gags Dennis Moreland Tack recommends you seek the help of a professional who has experience as you are learning to use them.
Related products
-

Doubled and Stitched Two Buckle Headstall #HS33
$119.99Description: The Doubled and Stitched Two Buckle Slide Ear Headstall #HS33 is made of 5/8 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. This headstall is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The beveled buckles are stainless steel. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. The crown piece on this headstall comes in 2 sizes: 36 inches in length for those horses 15 hands and under and 40 inches for those over 15 hands (see dropdown for choices).
How it works: The buckle pieces on this headstall are extra short to keep the buckles away from the horse’s eyes. This doubled & stitched headstall is not thicker than a single ply leather headstall and has that good feel in your hands and on the horse.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thicknesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance.
The headstall has teardrop bit ends with your choice of slot conchos, tie ends, or conchos (see dropdown).
Shown with slot conchos.
-

Double Buckle Leather Curb Strap #CU21
$36.00Description: My Double Buckle Leather Curb Strap is a really good all around curb that is both AQHA legal and NRCHA legal on a bridle. This curb is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel. The leather under the buckles is hand stitched together to prevent the buckles from slipping out of position.
How it works: This curb gives a mild and very consistent signal. It’s made of quality leather that doesn’t stretch or get limber with use. The holes are precisely punched to be the same on each side of the curb. This is a real easy curb to adjust and has plenty of adjustment for any bit and any size horse.
Visit my Tack Talk article “Curb Your Enthusiasm” to learn more about curbs.
-

Basket Stamped Slot Ear Headstall #HS40
$138.00Description: The Basket Stamped Slot Ear Headstall is made of 5/8 inch double and stitched skirting leather. It has a precisely designed slot to fit comfortably on the ear of any age or size horse. There is one beveled stainless steel adjustment buckle with a hand braided rawhide loop keeper. The extra hand stitching just below the buckle prevents it from slipping. The headstall is completely handmade and hand stamped.
Crafting: To make a doubled and stitched stamped headstall I take 2 pieces of skirting leather and split them to the correct thicknesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together and stamped. Doubled and stitched leather is more durable and longer lasting than single ply leather. The doubled & stitched items are not thicker than single ply leather so still have that good feel in your hands and on the horse.
Available with your choice of slot concho, concho, or tie string bit ends (see dropdown).
Shown with slot conchos.
-

Sliding Gag Bit with Snaffle Mouthpiece #20-9
$200.00 – $253.00Price range: $200.00 through $253.00Description: This Sliding Gag Bit with Snaffle Mouthpiece #20-9 comes with a 3/8 inch common snaffle and your choice of 3 headstalls. The Two Piece Snaffle works to give you a smooth, quick and more consistent response when you ask your horse to give its head. This custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on the cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
The stainless steel twisted wire headstall is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are available (see dropdown to select).
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The draw gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
You may also order the Gag Bit with a twisted wire mouthpiece: #20-42 Sliding Gag w/Twisted Wire Snaffle.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
-

7″ Aluminum Shanked Bit #B9
$199.00 – $228.00Price range: $199.00 through $228.00Description: The 7″ shanks on this bit are made of aluminum which makes it lighter weight than a steel bit. It’s designed so the junction at the mouthpiece and shanks will never pinch a horse. This bit is available with your choice of 4 mouthpieces, all 5 1/8 inches wide (see picture). The #0 mouthpiece is made of soft rubber. All others are made of steel with inlaid copper strips to promote salivation. The #1 Correction mouthpiece and the #1W Solid Port mouthpiece are 3/8 inch in diameter, the #2B Medium Port mouthpiece is 7/16 inch in diameter.
This bit comes with the #51 3/8 inch Latigo Leather Bit Hobble with hand braided rawhide keepers, shown here.
How it works: The 7″ Aluminum Shank Bit is milder than a steel bit because of its light weight and works well to introduce your colt to a shanked bit from a snaffle or hackamore. This bit allows a soft touch to pull a colt around to teach him to turn and maneuver in a shanked bit. It also works well on many older, finished horses and helps keep them relaxed and light in the face.
Shown with mouthpiece #2B.




