Curb Strap with Dog Chain #CU11
$33.00
Description: The straps on this Curb Strap with Dog Chain #CU11 are made of two 1/2 inch pieces of harness leather that are hand-edged, hand-rubbed and waxed. A 4 inch piece of chain is attached between the straps. The beveled buckles, dog chain and wire loops are made of stainless steel.
How it works: This curb delivers a strong signal and is the strongest of all the chain curbs I make.
To learn more about curbs visit my Tack Talk article “Curb Your Enthusiasm“.
Related products
-
Sliding Gag Bit with Twisted Wire Snaffle #20-42
Price range: $200.00 through $253.00Description: This Dennis Moreland Tack Sliding Gag Bit with Twisted Wire Snaffle #20-42 is built with a center bar on the bit cheeks which limits the movement of the sliding mouthpiece to provide quicker action and instant relief. The hard lay nylon cord allows the bit to slide easily. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. The twisted wire mouthpiece gives a stronger signal than the common snaffle and is very good to use if your horse has become resistant to giving his nose and/or lowering his head. This snaffle should improve stops in a horse that is trying to run off. This Sliding Gag comes with your choice of a stainless steel twisted wire headstall or, for the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch browband headstall (see photo).
How it works: The simultaneous pressure on the mouth from the sliding gag bit and on the poll from the twisted, shaped, stainless steel or the leather crown increases control of the nose and improves total balancing power to produce the ultimate in vertical flexion and feel. Because your rein aids are strengthened with the gag, your leg cues given at the same time become reinforced and easier for the horse to respond to. You will be able to better concentrate on fine details of your training rather than large rebalancing or repositioning efforts regardless of your type of riding. This gag bridle is an excellent training tool for both young and older horses that need to improve flexibility and response. Your horse will learn that when it breaks at the poll the release will be instant, smooth, and consistent. Since these gags release so quickly your horse is not trapped in position while it waits for the release to occur. This helps horses stay calm and confident in training and also when they are in competition. The leather crown works well with this twisted wire mouthpiece on horses that want to drop their heads while continuing to pull on the bit.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
If you don’t have experience with sliding gags Dennis Moreland Tack recommends you seek the help of a professional who has experience as you are learning to use them.
-
Curb Strap with Flat Chain #CU10
$33.00Description: This Curb Strap with Flat Chain #CU10 is made of an 1/2 inch wide chain attached between two 1/2 inch burgundy latigo leather straps that are hand-edged, hand-rubbed and waxed. The curb can be attached to the bit with the chain flat or with the chain in a twisted position. The beveled buckles, chain and wire loops are all made of stainless steel. This curb is AQHA legal when attached with the chain in the flat position.
How it works: The flat chain gives a stronger signal on the chin when the reins are tightened than any of the leather curbs. If the chain is attached in the twisted position the signal becomes even stronger (but is then not legal in AQHA shows).
See my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
-
3/8″ Latigo Leather Bit Hobble #BH51
$19.00Description: This bit hobble is made of 3/8 inch latigo leather and is 6 inches wide. It is hand-edged, hand-rubbed and waxed. It has beautiful hand-braided rawhide loop keepers. When you buy an aluminum bit it will come with this Latigo Leather Bit Hobble.
Also shown on the horse is the #B8 8” Aluminum Shank Bit and the #CU21 Double Buckle Leather Curb.
-
Single Buckle Leather Curb Strap #CU31
$30.00Description: The Single Buckle Leather Curb Strap #CU31 is made of 5/8 inch hand-edged harness leather that has been hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The buckle is stainless steel and the leather under the buckle is hand stitched together to prevent the buckle from slipping out of position.
How it works: This is designed for use on a Ring, Offset D or Eggbutt Snaffle Bit. This nice functional curb is built of high quality materials that will hold up through years of hard use. It will not stretch or get limber with use and is easy to adjust.
Visit my Tack Talk article “Curb Your Enthusiasm” to learn more about curbs.
-
Double Buckle Leather Curb Strap #CU21
$36.00Description: My Double Buckle Leather Curb Strap is a really good all around curb that is both AQHA legal and NRCHA legal on a bridle. This curb is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel. The leather under the buckles is hand stitched together to prevent the buckles from slipping out of position.
How it works: This curb gives a mild and very consistent signal. It’s made of quality leather that doesn’t stretch or get limber with use. The holes are precisely punched to be the same on each side of the curb. This is a real easy curb to adjust and has plenty of adjustment for any bit and any size horse.
Visit my Tack Talk article “Curb Your Enthusiasm” to learn more about curbs.
