1 1/4″ Hobble #H11
$113.00
Description: This 1 1/4″ Hobble #H11 is made of doubled and stitched burgundy latigo leather. The buckle is a stainless steel square-top roller buckle and the rings are stainless steel. At 48 inches when unbuckled it’s longer than the average hobble. A 4 inch strap between the rings maintains a 4 inch length between your horse’s legs. This is a great sized hobble for almost every horse and is specially designed for teaching your colt or horse to accept a hobble.
This hobble can be easily carried on your saddle rear D. The latigo leather is strong but soft and will not chafe a horse’s legs. The leather has been hand edged, rubbed, oiled, rubbed with saddle soap and waxed. It’s a really good feeling hobble and is built to last for years.
How it works: Figure 8 hobbles (which is the shape the hobble makes when it’s on a horse’s legs) work well for hobble training. This figure 8 hobble has a little extra tail length which is handy when hobble training a horse. If you have a colt that is squirming during its first training session, you can buckle the hobble a little longer and gradually tighten it as the colt settles down.
Many horses have been saved from severe injury when caught in wire because they were hobble trained. A horseman may also teach his/her horse to accept hobbles and sidelines so it won’t need to be tied or ground tied. When a horse is hobbled it won’t hurt its mouth with a jerk from a stepped on or looped rein. Hobbles and sidelines can also have a quieting effect on the horse’s mind. Investing in hobbles and their training has big pay-backs.
To put a set of hobbles on:
1. Starting with the right front leg, wrap the end of the hobble strap clockwise around the leg and lace it through the first metal ring.
2. Lace the strap through the second ring.
3. Run the strap behind the left front leg.
4. Buckle the strap.
For more information on hobbles, read my blog article Hobble Training for Your Horse’s Safety and my Tack Talk Article Hobble Along.
The first time you use the hobbles on your colt or horse, or while training the horse to accept hobbles, use a wide open sandy area. Do not put hobbles on in a confined space until they accept them easily and well. If you are not familiar with the use of hobbles seek help from a professional who is experienced with their use.
Related products
-
Sidepull #CP38
$199.00Description: The noseband on the Sidepull #CP38 is made of 3/8 inch firm nylon rope specially designed to lay correctly from the first ride. The headstall is made of single ply, 3/4 inch, dense, tight-fibered harness leather and has a 5/8 inch throat latch. The leather has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles and rings are all stainless steel.
Reins: If you’d like to purchase reins for your Sidepull some of our most popular choices are the #ASR6 DM Harness Leather Split Reins, or the #BLL1 Latigo on Latigo 5/8″ medium weight reins. At 6 1/2 to 7 feet either of these reins will work well on the smaller colt or horse. At 7 to 7 1/2 feet, the #ASR3 XX Harness Leather Split Reins are a good choice for the bigger colt or horse (generally 15 to 16 hands). Many of our other reins can also be used on this Sidepull. Visit the rein category to purchase your choice of reins separately.
How it works: Sidepulls are a good piece of equipment to use for starting colts, or to transition colts to from a soft rope hackamore. Using a sidepull is a nice way to teach young horses to move through turns with their noses first without putting any pressure on their delicate mouths. Once the colt is turning well with direct pressure from the sidepull a trainer will move to the snaffle, hackamore or bosal.
Sidepull is shown with the #BLL1 Latigo on Latigo 5/8 inch Medium Wt 7 ft Reins.
-
No Buckle Hobble with Leather Center #H3L
$105.00Description: This No Buckle Hobble with Leather Center #H3L is made of 1 3/4 inch doubled and stitched latigo leather. It has a 3 inch long latigo leather link in the center to separate your horse’s legs. The rings and squares are made of smooth stainless steel. This hobble has an easy “on/off” latch that makes it so quick and simple to take on and off your horse’s fetlocks. This should only be used on horses that are completely hobble broke.
Visit “Hobble Along” to read my Tack Talk article on the safe and proper use of hobbles.
Only for use on horses that are hobble broke.
-
Above the Hock Kick Chain #KC2
$78.00Description: The Above the Hock Kick Chain #KC2 is made of 1 inch double and stitched latigo leather with a stainless steel roller buckle and dee. The 18 inch chain attached to the dee is also stainless steel.
How it works: It is attached above the hock. Placement above the hock eliminates the chain being drug around the stall. This is a useful tool for horses that want to kick the stall or trailer. Most horses will stop kicking after a short time but a small percentage will need to wear a kick chain indefinitely. This kick chain is sold as a single. If you need additional Above the Hock Kick Chains, and you may need 1 for each back leg on a horse that has been kicking the stall or trailer for an extended time, please order additional in the “quantity” box.
This is not a tool to be used for teaching horses to not kick at people.
Shown on a horse that is 15.1 hands and 1100 pounds.
-
German Martingale with Split Reins #CM1C
Price range: $176.00 through $200.00Description: The German Martingale with Split Reins #CM1C is the same as the German Martingale Complete #CM1A but without headstall or bit. The martingale is made of 1/4 inch tan nylon cord and comes with your choice of 3 harness leather reins: #ASR6 DM Harness Leather Split Reins are 6 1/2 to 7 feet long and work well on smaller horses, the #ASR3 XX Harness Leather Split Reins are 7 to 7 1/2 feet long and a good choice for horses 14.2 to 16 hands and the #ASR2 XXX Harness Leather Split Reins are 7 1/2 to 8 feet long and work well for horses 16 hands and over. See dropdown to order.
How it Works: The key to the German martingale is the long neck strap giving a good line from the bit to the cinch. This allows the neck to lower from the withers before flexing at the poll. The 1/8 inch solid braid cord that runs through the bit to the reins has a high quality hard finish so slides very easily allowing a quick release. The release is more important than the pull but you have to pull to get the release. A horse learns from the release. The safety hobble strap attached to the neck strap goes through the gullet of the saddle and over the horn to prevent the neck strap from sliding to the ears.
Assistance from a professional is necessary to learn safe use of a German martingale.
The martingale is a very useful tool to aid a horse in learning proper head position as he learns collection. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
The labeled diagram shows the Complete German Martingale #CM1A. This German Martingale with Split Reins #CM1C is the same but comes without headstall and bit.
-
Adjustable Latigo Leather Cavesson #CA5
Price range: $80.00 through $86.25Description: This Adjustable Latigo Leather Cavesson #CA5 is made with a doubled and stitched 5/8 inch burgundy latigo leather noseband. The chin strap and headstall are single ply burgundy latigo leather. This latigo is a soft, pliable leather that feels good on a horse’s face. It’s stout and will last for years of hard use. The buckles and rings are stainless steel. This cavesson is available in small and large sizes. Both sizes are adjustable. The noseband on the small cavesson adjusts between 20 1/2 and 24 inches and the crown adjusts between 30 and 33 inches. The noseband on the large cavesson adjusts between 23 and 27 inches and the crown adjusts between 31 and 38 inches. Generally speaking, the small size will fit the smaller or young horse (approximately 14.2 hands and under) and the large size will fit the mature/bigger horse over 14.2 hands.
Size Measurement: An easy way to be certain to get the correct sized cavesson is to wrap a leadrope around the nose where the cavesson will lay, mark the leadrope with a magic marker, straighten it and then measure the leadrope. When measuring, be sure to wrap the leadrope loosely enough that the horse will have enough room between his nose and the cavesson to be comfortable and to be able to hold the bit. A good rule of thumb is 2 fingers width between the nose and cavesson (which is the diameter of most leadropes) if the horse is trained to a cavesson.
This cavesson is a good starting cavesson and is also good for sensitive horses. It should be adjusted loosely when starting any horse in it.
For more information on cavesson fit and use visit: There’s More to a Cavesson than Meets the Eye: How and Why to Use Cavessons
