3/8″ Latigo Leather Bit Hobble #BH51
$19.00
Description: This bit hobble is made of 3/8 inch latigo leather and is 6 inches wide. It is hand-edged, hand-rubbed and waxed. It has beautiful hand-braided rawhide loop keepers. When you buy an aluminum bit it will come with this Latigo Leather Bit Hobble.
Also shown on the horse is the #B8 8” Aluminum Shank Bit and the #CU21 Double Buckle Leather Curb.
Related products
-
Nylon Curb Strap with Chain #CU20
$16.00Description: The Nylon Curb Strap #CU20 is made with 1/8 inch nylon cord ties and a stainless steel dog chain. This is a great functioning curb and works well for the budget minded horseman.
How it works: This curb gives a strong signal. Check your knots after you tie this to your bit to make certain they are holding securely.
Please visit my tack talk article “Curb Your Enthusiasm” to learn more.
-
8″ Aluminum Shanked Bit #B8
Price range: $199.00 through $228.00Description: The 8″ shanks on this bit are made of aluminum. They are lighter weight than a steel bit which makes this a milder bit than a steel bit. It’s designed so the junction at the mouthpiece and shanks will never pinch a horse.
This bit is available with your choice of 9 mouthpieces. All the mouthpieces are 5 1/8 inches wide (see picture). All except the #0 Mouthpiece are made of steel with inlaid copper strips to promote salivation. The #0 Mouthpiece is made of soft rubber. The #1 Correction Mouthpiece and the #1W Solid Port Mouthpiece are 3/8 inch in diameter, the remainder are 7/16 inch in diameter. Make your selection in the dropdown.
This bit comes with the #BH51 3/8 inch Latigo Leather Bit Hobble, shown here.
How it works: Bits with aluminum shanks are milder than steel bits because of their light weight. This bit offers the ultimate in feel and control when you need a light touch but want the quick signal the 8 inch shanks provide. This is a nice switch when a horse needs a softer signal than a steel bit and it helps promote relaxation in a tense horse. It’s also great to lope in before showing. Many horses can be ridden continuously in this bit.
Shown is the late Mr. Gary Gonsalves riding Reyzin The Cash in the 2016 NCHA Super Stakes Finals with this Aluminum Shank Bit, Curb Strap with Flat Chain #CU10 and XXX Harness Leather Split Reins #ASR2. Photo courtesy of Mark Michels.
Bit is shown with mouthpiece #4F.
-
Offset D Ring Snaffle Bit #19
$150.00Description: The D rings on this Offset D Ring Snaffle Bit are made of 1/4 inch steel and are 2 1/4 inches in diameter. Mouthpiece #9 is 3/8 inch in diameter and 5 1/8th inches wide with inlaid copper bars to promote salivation. Mouthpiece #42 is 3/16 inch in diameter and 5 /8 inches wide with a gentle twist.
How it works: Because the D rings on this snaffle don’t slide and the area of contact on the mouth is wider than on a ring snaffle this bit gives a stronger, quicker signal than a ring snaffle. The contact on the face from the Ds also helps the horse bring the opposite side of his face through a turn. This is a great bit to ride your colts in.
Although you should always check with show management, this snaffle with mouthpiece #9 is legal in AQHA & NRCHA snaffle bit classes.
-
Curb Strap with Flat Chain #CU10
$33.00Description: This Curb Strap with Flat Chain #CU10 is made of an 1/2 inch wide chain attached between two 1/2 inch burgundy latigo leather straps that are hand-edged, hand-rubbed and waxed. The curb can be attached to the bit with the chain flat or with the chain in a twisted position. The beveled buckles, chain and wire loops are all made of stainless steel. This curb is AQHA legal when attached with the chain in the flat position.
How it works: The flat chain gives a stronger signal on the chin when the reins are tightened than any of the leather curbs. If the chain is attached in the twisted position the signal becomes even stronger (but is then not legal in AQHA shows).
See my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
-
Sliding Gag Bit with Snaffle Mouthpiece #20-9
Price range: $200.00 through $253.00Description: This Sliding Gag Bit with Snaffle Mouthpiece #20-9 comes with a 3/8 inch common snaffle and your choice of 3 headstalls. The Two Piece Snaffle works to give you a smooth, quick and more consistent response when you ask your horse to give its head. This custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on the cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
The stainless steel twisted wire headstall is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are available (see dropdown to select).
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The draw gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
You may also order the Gag Bit with a twisted wire mouthpiece: #20-42 Sliding Gag w/Twisted Wire Snaffle.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
