1/2″ x 5 3/4″ Latigo Bit Hobble #BH41
$40.00
Available on backorder
Description: For use on any shank bit, this bit hobble has a beautiful hand braided rawhide ball and hand braided rawhide loop keepers. It is made of 1/2 inch latigo leather and is 5 1/8th inches wide. The latigo leather is edged hand-rubbed and waxed.
Shown on the horse is also the #DMR3 Round 3/8″ Nylon Mecate.
Related products
-
Curb Strap with Flat Chain #CU10
$33.00Description: This Curb Strap with Flat Chain #CU10 is made of an 1/2 inch wide chain attached between two 1/2 inch burgundy latigo leather straps that are hand-edged, hand-rubbed and waxed. The curb can be attached to the bit with the chain flat or with the chain in a twisted position. The beveled buckles, chain and wire loops are all made of stainless steel. This curb is AQHA legal when attached with the chain in the flat position.
How it works: The flat chain gives a stronger signal on the chin when the reins are tightened than any of the leather curbs. If the chain is attached in the twisted position the signal becomes even stronger (but is then not legal in AQHA shows).
See my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
-
Double Buckle Leather Curb Strap #CU21
$36.00Description: My Double Buckle Leather Curb Strap is a really good all around curb that is both AQHA legal and NRCHA legal on a bridle. This curb is made of single ply 5/8 inch harness leather that is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The buckles are stainless steel. The leather under the buckles is hand stitched together to prevent the buckles from slipping out of position.
How it works: This curb gives a mild and very consistent signal. It’s made of quality leather that doesn’t stretch or get limber with use. The holes are precisely punched to be the same on each side of the curb. This is a real easy curb to adjust and has plenty of adjustment for any bit and any size horse.
Visit my Tack Talk article “Curb Your Enthusiasm” to learn more about curbs.
-
Ring Snaffle Bit #17
Price range: $50.00 through $150.00Description: The Ring Snaffle Bit #17 is made of 5/16th inch steel. The rings are 2 3/4 inches in diameter. This snaffle is available with 4 mouthpieces (see picture). All mouthpieces are 5 1/8th inches wide. Mouthpiece #9 has inlaid copper bars to promote salivation.
Snaffle Bit Mouthpiece choices:
#0: This soft rubber mouthpiece is 11/16″ in diameter. This mouthpiece is designed for very sensitive horses. It is soft on the tongue and bars and can be an excellent first mouthpiece for colts.
#9: This steel 2 piece snaffle mouthpiece is 3/8” in diameter. This is a great tool for anyone who wants a quicker and more consistent response when a horse is asked to give his head. Champion trainers including Tarin Rice, Boyd Rice, Gerald Alexander, Robbie Boyce, Matt Koch, Brad Lund, & Bozo Rogers all use and really like the results they get with this snaffle. Some of their comments are: “more feel than any snaffle I’ve ever put in a horse’s mouth”, “best snaffle I’ve ever ridden”, “this snaffle works so well!”, “my colts are going to the futurity in this snaffle”.
#42: The 3/16th inch steel twisted wire is designed for the horse that has become resistant to the plain snaffle and needs a bit of extra signal on the corners of the mouth to respond correctly. This steel bit is especially built at this diameter to prevent it from pinching or grabbing the skin at the sides of the mouth.
#48: The 1/8 inch stainless twisted wire mouthpiece is specifically designed so it will not pull or pinch the corners of the horses mouth like a steel mouthpiece of the same size will. This small diameter combined with the twisted wire will help a horse that is resistant to a pull to respond quickly and correctly.
Although you should always check with show management, this snaffle with mouthpiece #9 is legal in AQHA & NRCHA snaffle bit classes. Shown is mouthpiece #9.
-
Bled Double Buckle Curb Strap #CU30
$45.00Description: The Bled Double Buckle Curb Strap #CU30 is made of 1/2 inch latigo leather that has been bled (braided) in the center. The bled leather has more texture than a flat leather strap. The texture increases the feel of the curb. The buckles and wire loop keepers are stainless steel. The leather under the buckles is hand stitched together to prevent the buckles from slipping out of position.
How it works: This curb has a lot of feel on a young horse without the advanced signal of a chain. It makes a very nice transition curb when you need just a bit more signal than a leather strap but don’t need the strong signal of a chain curb strap. This curb is not legal on a shanked bit in AQHA classes. It does make a great training curb.
See my Tack Talk article “Curb Your Enthusiasm” to learn more about curb straps.
-
Sliding Gag Bit with Snaffle Mouthpiece #20-9
Price range: $200.00 through $253.00Description: This Sliding Gag Bit with Snaffle Mouthpiece #20-9 comes with a 3/8 inch common snaffle and your choice of 3 headstalls. The Two Piece Snaffle works to give you a smooth, quick and more consistent response when you ask your horse to give its head. This custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on the cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
The stainless steel twisted wire headstall is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are available (see dropdown to select).
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The draw gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
You may also order the Gag Bit with a twisted wire mouthpiece: #20-42 Sliding Gag w/Twisted Wire Snaffle.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
