3/4″ Split Ear Headstall #HS12
$85.00
Description: The 3/4 Inch Split Ear Headstall is made of single ply 3/4 inch heavy harness leather. This headstall has an extra-long ear split so it easily adjusts to fit any size horse, big and small. As a matter of fact it fits bigger horses better than any of my other headstalls. The buckle is beveled stainless steel with a leather loop keeper. The leather beneath the buckle is hand sewn together to prevent the buckle from slipping. The headstall has been edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The 3/4 Inch Split Ear is designed with teardrop bit ends.
Available with your choice of tie end, slot concho or concho bit ends (see dropdown). Slot conchos are the safest way to attach a headstall to a bit, I highly recommend the slot concho. Dennis
Shown with slot conchos.
Related products
-
Doubled and Stitched Browband Headstall #HS34
$140.99Description: The Doubled and Stitched Browband Headstall is made of 3/4 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. The headstall has beveled stainless steel adjustment buckles with leather keepers on each cheek. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. The throatlatch is 5/8 inch racetrack leather. The headstall has been edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The crown piece on this headstall comes in 2 sizes: 36 inches in length for those horses 16 hands and under and 40 inches for those over 16 hands (see dropdown for choices). This is a general size recommendation and works for most horses.
How it works: The short cheek pieces on this headstall keep the buckles away from the horse’s eyes. This doubled & stitched headstall is not thicker than a single ply leather headstall and will have that good feel in your hands and on the horse. A beautiful hard-working headstall made to fit a horse. The #BC1 Straight Breastcollar looks real good with this headstall and is a nice combination for the Versatility Ranch shows.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thickesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance.
Bit ends are tear drop shaped with your choice of slot conchos, conchos or tie ends (see dropdown).
Shown with slot conchos.
-
Sliding Gag Bit with Snaffle Mouthpiece #20-9
Price range: $200.00 through $253.00Description: This Sliding Gag Bit with Snaffle Mouthpiece #20-9 comes with a 3/8 inch common snaffle and your choice of 3 headstalls. The Two Piece Snaffle works to give you a smooth, quick and more consistent response when you ask your horse to give its head. This custom designed bit slides easily on the hard lay nylon slide cord made especially for this bit. You will get quick and consistent cues from your reins because of the way the bit slides on the cord. The cord is attached to a stainless steel buckle which attaches it to adjustable single ply 3/4 inch harness leather cheeks. See the diagram at left to visualize this.
The stainless steel twisted wire headstall is designed for horses that need a very strong signal. For the more sensitive horse, a 3/4 inch harness leather slide ear headstall or a 3/4 inch brow band headstall are available (see dropdown to select).
How it works: The Sliding Gag Bit puts pressure on the mouth and at the same time the headstall crown puts pressure on the poll. These 2 points of pressure increase control of the nose and improve total balancing power. With the increased control and balance you will gain vertical flexion and feel.
The draw gag bit strengthens your rein aids so your leg cues given at the same time become reinforced. This makes it easier for the horse to respond. You will be able to concentrate on fine details of your training, rather than large rebalancing or repositioning efforts. This gag bridle will improve your horse’s flexibility and increase his response to your cues.
The center bar on the bit cheeks limits the movement of the sliding mouthpiece. This limited movement provides a quicker action and a much quicker release than gags with longer shanks. Your horse learns that when it breaks at the poll the release will be instant, smooth and consistent. Your horses will be calmer and more confident in training and competition when they are not trapped by a slow releasing gag.
Although this Sliding Gag is sold without reins, you can choose any Dennis Moreland split reins or roping reins for your sliding gag. To select your reins simply visit the rein category and add them to your order.
You may also order the Gag Bit with a twisted wire mouthpiece: #20-42 Sliding Gag w/Twisted Wire Snaffle.
Seek the help of a professional as you are learning to use a sliding gag bit if you don’t have experience.
-
Doubled and Stitched Two Buckle Headstall #HS33
$119.99Description: The Doubled and Stitched Two Buckle Slide Ear Headstall #HS33 is made of 5/8 inch race track harness leather lined with oil-tanned lining leather. Race track harness is a very dense, fine grained leather which makes it strong but flexible. This is the best leather I can buy. The lining leather feels good against your horse’s face. This headstall is hand-edged, hand-rubbed, treated with Neatsfoot Oil and hand-rubbed again. The beveled buckles are stainless steel. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. The crown piece on this headstall comes in 2 sizes: 36 inches in length for those horses 15 hands and under and 40 inches for those over 15 hands (see dropdown for choices).
How it works: The buckle pieces on this headstall are extra short to keep the buckles away from the horse’s eyes. This doubled & stitched headstall is not thicker than a single ply leather headstall and has that good feel in your hands and on the horse.
Crafting: To make a doubled and stitched headstall I take the race track harness and the oil-tanned lining leathers and split them to the correct thicknesses. Next I glue the 2 pieces and carefully cut the desired shapes. Finally it’s stitched together. Doubled and stitched leather is more durable and longer lasting than single ply leather and also has a nice eye-catching appearance.
The headstall has teardrop bit ends with your choice of slot conchos, tie ends, or conchos (see dropdown).
Shown with slot conchos.
-
3/4″ Two Buckle Slide Ear Headstall #HS23
$118.00Description: The 3/4 Inch Two Buckle Slide Ear Headstall #HS23 is made of single ply heavy harness leather that is 3/4 inch wide and is designed with teardrop bit ends The sliding ear piece on this headstall is doubled and stitched. The leather is hand-edged, hand-rubbed, oiled with Neatsfoot Oil and hand-rubbed again. The buckles are beveled stainless steel. The leather beneath the buckles is hand sewn together to prevent the buckles from slipping. They’re always right where you need them when you adjust the size of the headstall for another horse.
This headstall is available in 3 sizes (see dropdown). The small horse size has a 28 inch crown and is designed to fit horses under 14 1/2 hands. The average horse size has a 33 inch crown to fit horses approximately 14 1/2 to 15 1/2 hands. The large horse size comes with a 36 inch crown and is designed to fit horses over 15 1/2 hands.
Like the#HS13 5/8 Inch Two Buckle Slide Ear this is a great headstall for any discipline with a shank bit. It comes with your choice of slot conchos, conchos or tie string bit ends (see dropdown).
Shown with slot conchos.
