1/2″ Nylon Lead Rope with Snap #ALR1
$30.00
Description: This 1/2″ Nylon Lead Rope with Snap #ALR1 is made of white medium lay 1/2 inch nylon rope. The stainless steel bull snap is hand braided/spliced in. The tail is braided back to prevent unraveling. The length is 10 feet before braiding, making it approximately 9 ft. 4 in. when it’s finished. The 1/2 inch nylon makes a good, stout leadrope with plenty of flexibility to tie easily. You can read how to properly tie a lead rope by clicking here: Take Me To Your Lead Rope.
Related products
-
Bill Riddle Sideline #SL2
Price range: $97.00 through $106.00Description: The Bill Riddle Sideline #SL2 is made of two doubled and stitched burgundy latigo leather cuffs with easy on/easy off closures. These cuffs are 1 3/4 inch wide and connected by your choice of 24, 30 or 36 inch (see dropdown) pieces of soft white nylon rope. The rectangles and Dees are made of smooth round stainless steel rod.
How it works: This is a very helpful piece of equipment to use when you are sacking out a colt, teaching a young horse to stand hobbled or wanting to keep a horse from kicking in the trailer. You can prevent a horse that kicks in the trailer from hurting himself or damaging the trailer by using this sideline on just the left side or right side legs or use two sidelines and cross them between the legs. Sidelines and hobbles can both have a quieting effect on a horse’s mind.
The first time you use the sideline on your horse or while training the horse to accept them use a wide open sandy area. Do not put it on in the trailer or other confined space until they accept the sideline easily and well.
-
Nylon Tiedown Strap #ZH
$33.00Description: This is a high quality and at the same time economical tiedown strap made of 1/4 inch solid braid nylon cord. The cord loops through the ring in the tiedown and is adjustable. The swivel snap is stainless steel. This Nylon Tiedown Strap #ZH is very durable and let’s you stay on budget while getting a quality piece of gear!
-
German Martingale with Split Reins #CM1C
$202.00Description: The German Martingale with Split Reins #CM1C is the same as the German Martingale Complete #CM1A but without headstall or bit. The martingale is made of 1/4 inch tan nylon cord and comes with your choice of 3 harness leather reins: #ASR6 DM Harness Leather Split Reins are 6 1/2 to 7 feet long and work well on smaller horses, the #ASR3 XX Harness Leather Split Reins are 7 to 7 1/2 feet long and a good choice for horses 14.2 to 16 hands and the #ASR2 XXX Harness Leather Split Reins are 7 1/2 to 8 feet long and work well for horses 16 hands and over. See dropdown to order.
How it Works: The key to the German martingale is the long neck strap giving a good line from the bit to the cinch. This allows the neck to lower from the withers before flexing at the poll. The 1/8 inch solid braid cord that runs through the bit to the reins has a high quality hard finish so slides very easily allowing a quick release. The release is more important than the pull but you have to pull to get the release. A horse learns from the release. The safety hobble strap attached to the neck strap goes through the gullet of the saddle and over the horn to prevent the neck strap from sliding to the ears.
Assistance from a professional is necessary to learn safe use of a German martingale.
The martingale is a very useful tool to aid a horse in learning proper head position as he learns collection. If adjusted correctly a martingale does not force the head to stay in any given position but allows the horse a guide for head placement through automatic release of pressure on the reins when correct head placement is achieved. This can make it easier for a horse to reach a more collected frame over time by allowing assistance with head position as the rider teaches the horse to drive from behind.
The labeled diagram shows the Complete German Martingale #CM1A. This German Martingale with Split Reins #CM1C is the same but comes without headstall and bit.
-
String Cavesson w/ Rawhide Knots #CA3
$69.00Description: The String Cavesson with Rawhide Knots #CA3 has a noseband made of tan 1/8 inch solid braid nylon cord. The adjustment knots at the bottom of the noseband are covered with handbraided rawhide pineapple knots. These knots allow the noseband to be quickly and easily adjusted to 19, 21 and 23 inches. This is nice if you have a number of horses to ride. The headstall is made of 1/2 inch burgundy latigo leather that has been edged and hand-rubbed. The buckle is beveled stainless steel with a leather loop keeper. The headstall leather under the buckle is hand sewn together to prevent the buckle from slipping when the headstall is adjusted. This cavesson lays so flat under your bridle you won’t know it is there!
Size Measurement: An easy way to be certain this cavesson will fit is to wrap a leadrope around the nose where the cavesson will lay, mark the leadrope with a magic marker, straighten it and then measure the leadrope. When measuring, be sure to wrap the leadrope loosely enough that the horse will have enough room between his nose and the cavesson to be comfortable and to be able to hold the bit. A good rule of thumb is 2 fingers width between the nose and cavesson (which is the diameter of most leadropes) if the horse is trained to a cavesson. This will fit any nose between approximately 19 and 23 inches.
This cavesson is a good all-around cavesson and can be used on colts if adjusted loosely when starting them in it.
For more information on cavesson fit and use visit: There’s More to a Cavesson than Meets the Eye: How and Why to Use Cavessons
-
Chuck Frasier Sidepull #CP40
$271.00Description: The noseband on this sidepull is crafted from firm 3/8″ nylon rope, which is specially designed to ensure it lays correctly from the first ride. The headstall is made of single ply 3/4″ tight-fibered harness leather with a 5/8″ throat latch. This sidepull comes with slot conchos which are the safest and most secure conchos available. You can see the photos on the left for instructions on slot concho removal and application. The buckles on this Chuck Frasier Sidepull #CP40 are stainless steel with the leather below the buckles stitched to keep them in place.
How it works:
Since this sidepull is considered a bitless bridle, it is designed for use on the adult horse and is a great tool to avoid putting pressure on the horse’s mouth while maintaining plenty of control. With the design of this sidepull, the stainless-steel shanks come against the opposite side of the horse’s face with a direct rein pull so the horse starts his turns without leaning. Put your leg on him once the turn is started to teach him to complete the turn without leaning. The noseband in combination with the dog chain curb provides a strong signal to stop.Watch the video “The Secret to using the Chuck Frasier Sidepull” to learn more.
Shown with ASR3 XX Harness Leather Split Reins.
